6ES5 930-7AA11

Siemens 6ES5 930-7AA11 — S5-110A PS 930 Power Supply

The Siemens 6ES5 930-7AA11 is a SIMATIC S5 PS 930 power supply for the internal 5 V rail of the S5-110A rack. Parts lists for this order number give a 220 V AC input and a 5 V DC, 0.7 A output. Check the nameplate and hardware revision of the installed unit to confirm its output rating.

The module converts mains power to the internal voltage used by the CPU and other modules. In a cabinet fitted with S5-110 modules, check the rack order number, such as the 6ES5 710-0SA11, alongside the power supply label. The manual also lists the earlier 6ES5 710-0AA11 rack in its spare parts table. When tracing a fault at the CPU 900, start with the internal supply.

Internal 5 V rail and field power

The Siemens S5-110A manual describes the 930 family as the internal 5 V supply and the 931 family as the external 24 V supply. Trace the control and field circuits separately on the cabinet drawings for the 400 and 401 input modules and the 410, 415 and 417 output modules. If an output LED is lit and the field device stays off, check the load supply and output circuit separately.

The PS 930 5 V LED indicates that the internal voltage is present, as described in the start-up section. When tracing S5 interconnect cables, distinguish the mains input, the 5 V rack rail and the field supply. Use the appropriate rack drawing for additions such as interface modules and the 500 programmer interface.

7AA11, 7AA12 and other 930 models

The 5.2 V DC, 0.9 A entry in the Siemens S5-110A specification table is for the 6ES5 930-7AA12. Some product listings also quote that rating for the 7AA11. Check the full nameplate before using an output rating to assess the load. The 6ES5 930-7AA21 takes 115 V AC, while the 6ES5 930-7AA31 takes 24 V DC.

The 6ES5 930-8MD11 is a PS 930 model with a 24 V DC output for the S5-100U. The 6ES5 931-8MD11 is a separate 24 V supply module, and the 6ES5 932-3SA11 is an S5-110S power supply and housing assembly. When choosing a spare, match the full order number, rack, input and output.

Editor’s note

Read the suffix on the unit. The 7AA11 and 7AA12 look similar. Use the full order number when consulting Siemens tables. Check the cabinet records against the label if the module has been replaced before.

Start at the supply. If the 5 V LED is dark, have qualified maintenance personnel check the mains feed, switch and fuse. Isolate the mains before checking the fuse or removing the unit.

Separate a CPU STOP from a field fault. Siemens lists low 5 V as one possible cause of the CPU 900 STOP indication. If the internal rail is in order, check the CPU mode and the field load supply separately.

Locate the program backup. Before dismantling the rack, record the fitted program memory order number and locate the program copy. Identify the correct S5 memory module by its full part number.

Ask for the load test when buying used. For used PLC power supplies, look for a readable label, connector condition and a 5 V reading taken under load in the appropriate rack.

OtomasyonAVM resources and PDFs

Siemens S5 PLC overview · S5-110 mounting rack · CPU 900 model page

SIMATIC S5 PDF archive. See the Siemens manual below for the S5-110A power arrangement and start-up information.

Related topics

7AA12 — PS 930 with 220 V AC input · 7AA21 — PS 930 with 115 V AC input · 7AA31 — PS 930 with 24 V DC input

Browse SIMATIC S5

SIMATIC S5 range · S5 90/110 modules · S5 power supplies

External references

7AA11 exact part listing · Siemens S5-110A manual — §1.4 specifications and §3.2 indicators · 7AA11 product listing with a different output rating