6ES5 372-0AA61

Siemens 6ES5 372-0AA61 SIMATIC S5-150S 32 KB EPROM Memory Submodule

The Siemens 6ES5 372-0AA61 is a 372 memory submodule for the SIMATIC S5-150S. It provides 32 KB (16 K words) using four 2764 devices. The UV-erasable EPROM retains the STEP 5 user program when power is off. In an S5-150S, the submodule fits the 350 memory module through the 6ES5 983-0BA11 adapter and operates in word mode.

In a legacy SIMATIC S5 cabinet, the 372 holds a permanent copy of the PLC application program. During replacement, the slot and start address on the 350 matter as much as the program on the EPROM. A correctly programmed submodule at the wrong address may leave the controller unable to find the program where it expects it.

How does the submodule fit the 350?

The 350 has two memory submodule slots on the front. Siemens’ S5-150S example uses the compact 350-3KA21. Fit the 372-0AA61 with the 983-0BA11 adapter. Switch off the power supply before removing or inserting the 350 or the EPROM submodule. The S5-150U central rack is a separate model. When identifying a spare in the S5 range, look for 150 S on the central unit label.

Where are the address and word mode set?

Install jumper 7 on the 350 for word operation in an S5-150S. Set the EPROM start address at coding socket 19 for slot 1 or coding socket 26 for slot 2. The 350 RAM area is configured separately at socket 4. Lay out the EPROM ranges contiguously and avoid overlap with other memory areas. During PLC troubleshooting, if the programmer reads the EPROM but the controller cannot access it, check the adapter, slot number and address jumpers first.

Which type should you select on the programmer?

Siemens’ PG 615 Table 2.9 specifies that software V1.3 and later handles the 372-0AA61 in WORD mode regardless of the preset. On supported EPROM programmers that request a programming number, select 57 for the 0AA61. The similar 372-1AA61 uses 27C64 devices and has a separate programming entry. For an online backup between the PG and PLC, select the S5 programming cable for the actual port.

On an S5 communications system with a CP 530, COM 530 on the PG 615 also lists the 372-0AA61 in its submodule selection screen. This entry is for data transfer through the PG. Use the CP hardware table when choosing a submodule for the physical slot on the processor.

How do similar EPROMs differ?

The 372-0AA51 is another EPROM in the 372 family. The 373-0AA21 and 373-0AA41 also use the 983-0BA11 adapter, but the 350 installation table lists those two cards for S5-150A/K. The 373-0AA61 and its CMOS version, the 373-1AA61, are distinct 64 KB modules. The 350 manual excludes 27128 and higher device types.

The 373-1AA41 CMOS EPROM and 375-0LA41 EPROM also have 32 KB of memory. Check the module family and slot compatibility as well as capacity. The 374-1KH21 is a separate Flash EPROM card. Flash and EEPROM are electrically erased. The 372-0AA61 requires UV erasure before reprogramming. The battery-backed CMOS RAM on the 350 is a separate working-memory area.

Editor’s note

Record all three labels. Before removal, photograph the 150 S central unit, the 350 memory module and the 372-0AA61 submodule.

Account for the adapter. The 983-0BA11 may come out with the old submodule. Check that the adapter is in place before fitting the spare.

Capture the jumper settings. Photograph jumper 7 and coding socket 19 or 26 on the 350, according to the slot in use.

Read the working EPROM first. Save the readable contents of the original in a separate file. After programming the spare, read it back and compare the contents with that file.

Check the spare in two stages. Confirm the programmer can read it correctly, then confirm the controller recognizes it in the intended slot and address range.

OtomasyonAVM resources and PDFs

+ SIMATIC S5 memory modules and EPROM cards

+ EPROM memory and UV erasure

+ OtomasyonAVM SIMATIC S5-115 PDF archive

Related topics

+ 6ES5 372-0AA51 372-series EPROM

+ 6ES5 373-0AA21 EPROM · 6ES5 373-0AA41 EPROM

+ 6ES5 373-0AA61 EPROM · SINEC L1 CP 530

If you have a 6ES5 372-0AA61 to sell, send the label photo, quantity and readback or test status to otomasyonavm@gmail.com.

Browse the S5 range

SIMATIC S5 memory modules · SIMATIC S5 · Siemens S5 PLC

Siemens and external references

+ Siemens 350 memory module and 370/372/373 installation instructions, C79000-B8500-C236-07 (German)

+ Siemens PG 615 manual, Table 2.9, S5-150S and WORD mode (German)

+ Siemens SINEC L1 manual, COM 530 submodule selection, p. 3-14 (English)

+ Siemens EPROM programming table, number 57 and four 2764 devices (German)

+ IBHsoftec USB Prommer table, 372-0AA61 and 372-1AA61 programming entries (German)