About Omron
From a small Osaka workshop to sensing, control and healthcare technology
Omron's history began with the need to control the exposure time of an X-ray machine more accurately. That small engineering business eventually expanded into relays, switches, sensors, programmable controllers, transport systems, robotics and healthcare technology. A shared idea connects these activities: measure a condition, interpret the information and produce an appropriate response. The same approach appears throughout modern industrial automation.
Editor's note: 1933 marks the founding, 1948 incorporation, 1959 the establishment of the OMRON trademark, and 1990 the change to OMRON Corporation. These dates describe different events. Similarly, a first development, its commercial deployment and a later product generation are separate milestones.
1900–1932: Kazuma Tateishi's engineering background
Founder Kazuma Tateishi was born in Kumamoto, Japan, on September 20, 1900. After studying electrical engineering, he worked in public service and at Inoue Electric Manufacturing. His experience with induction-type protective relays provided a technical foundation for devices he would later develop himself. Before Omron had large factories or an extensive catalog, it had an engineer's practical experience in solving a specific problem.
1933: A business built around an X-ray timer
Tateishi Electric Works was founded in Higashinoda, Osaka, on May 10, 1933. A conversation with an X-ray equipment salesman had prompted Tateishi to develop a more precise timing device. The aim was accurate exposure control at approximately one twentieth of a second. A prototype was tested at an Osaka hospital, followed by orders from equipment manufacturers.
The importance of this product went beyond its sales. Controlling when an electrical event begins and how long it lasts would remain a fundamental task in automation. Modern timer relays use many different designs, but they address the same underlying need to connect timing with process behavior. The original X-ray timer should nevertheless be understood as its own technology, rather than described as an early modern PLC.
1935–1943: From protective relays to precision microswitches
General-purpose and protective relays became important after the X-ray timer. Reconstruction following the 1934 Muroto Typhoon increased demand for protective relays, and a relay factory followed in 1935. The business was expanding from a device associated with medical equipment into components that could serve electrical switchboards and control circuits.
Work on precision switches began in 1941 following a request from the University of Tokyo's aeronautical research organization. Domestic production of precision microswitches was achieved in Japan in 1943. The project reflected the importance of turning a small mechanical movement into a dependable electrical signal. Wartime conditions limited its commercial development, but the knowledge of switching, durability and precision manufacturing contributed to later automation work.
1945–1955: Moving to Kyoto and rebuilding after the war
Manufacturing moved to Kyoto in June 1945. After the war, falling relay orders encouraged the business to develop electrical products for everyday use. This was a period of rebuilding and searching for new demand, rather than uninterrupted expansion. The business was incorporated as Tateishi Electric Corporation on May 19, 1948.
Omron identifies 1955 as the beginning of its automation business. This involved more than developing switches: the company established a quality framework connecting research, manufacturing, inspection and management. Making a component work in a laboratory and producing it consistently in volume are different engineering challenges. Building that manufacturing discipline was an important part of the company's development.
1959–1990: Establishing the OMRON name
The name OMRON comes from Omuro, a district of Kyoto. Its Kyoto origins therefore fit alongside the company's founding in Osaka. The official chronology dates the establishment of the OMRON trademark to January 1959. The English company name became OMRON TATEISI ELECTRONICS in November 1968, followed by OMRON Corporation in January 1990. The spellings Tateisi and Tateishi found in historical material also reflect different romanizations of the founder's name.
1960: Moving from mechanical contact to electronic sensing
The TL-1 contactless proximity switch, developed in 1960, was an important step in Omron's electronic automation work. Detecting a part without repeatedly moving a mechanical contact changed how sensing devices could be incorporated into machinery. This development helps explain the place of inductive sensors and electronic sensing within the company's history.
A central research and development laboratory was completed in the Kyoto area that year. The wider change involved more than making a switch operate faster. Omron was developing from a manufacturer of individual components into a business working on sensing and control together. Subsequent traffic-control and station-automation projects drew on this expertise.
1963–1967: Ticket machines, traffic signals and station automation
In 1963, a machine dispensing different types of meal ticket entered service at the Daimaru department store in Kyoto. Combining payment, selection, validation and ticket output illustrated how automation could extend beyond factories. In 1964, Omron also developed electronic traffic control that detected vehicles and adjusted signal operation to traffic conditions.
An automated station system with ticket gates entered service at Hankyu's Kita-Senri station in March 1967. Credit should also reflect the work of other participants. IEEE's historical record describes the 1965 work of Osaka University and Kintetsu, followed by an improved system jointly developed by Omron, Kintetsu and Hankyu in 1967. Processing punched and magnetic tickets while managing passenger movement brought sensing, information processing and mechanical action together in one system.
1970: SINIC and the relationship between technology and society
The SINIC framework was developed to explore the interaction of science, technology and social needs, and was presented at the International Future Research Conference in 1970. Scientific advances can enable new technologies, while society's needs can influence the direction of research. It is best understood as a framework for considering future business and research priorities, rather than a guarantee that particular predictions will come true.
1972: SYSMAC and programmable control
The SYSMAC programmable controller developed in 1972 was a major milestone in Omron's factory-automation history. Defining operating sequences through a program, instead of relying entirely on wiring and relay contacts, made it easier to adapt machinery to changing production requirements. A central benefit of PLC technology is the ability to change machine behavior without rebuilding the entire control circuit.
In present-day terms, Ladder Diagram expresses control logic, input and output hardware connects that logic to the physical machine, and remote I/O distributes those connections around an installation. These are different functions rather than alternative names for one product. The same distinction between programming, hardware and communications helps explain subsequent generations of SYSMAC technology.
1972–1973: A separate path into healthcare
The MC-320 electronic thermometer appeared in 1972, followed by the HEM-1 blood pressure monitor in 1973. HEM-1 was Omron's first blood pressure monitor, rather than a fully automatic digital device of the kind familiar today. The Healthcare history describes it as a manual, manometer-type instrument. Treating healthcare as a recent addition to Omron would overlook these early developments.
Later examples included the MC-20 home thermometer with an LCD display in 1980 and the HEM-706 automatic blood pressure monitor using fuzzy technology in 1991. Development increasingly addressed how people could use measurement equipment correctly, as well as how the measurement was obtained. The establishment of OMRON Healthcare as a separate company in July 2003 was an important organizational milestone for this business.
1972: Omron Taiyo and accessible manufacturing
Omron Taiyo, established in 1972, shows that the company's history includes changes in how production work is organized. Developed with Japan Sun Industries, it created a factory model supporting the participation of people with disabilities. The founder's interest in health engineering and powered prosthetic arms forms part of this broader story. In this context, automation was also considered as a way to change working conditions and expand what people could do.
1979–1990: Growth, management change and international identity
Kazuma Tateishi handed the presidency to Takao Tateishi in 1979. In 1983, he criticized growing bureaucracy and a weakening entrepreneurial approach within the company, describing the problem as “big business syndrome.” This episode helps explain why a history of Omron needs to cover more than product launches. As the organization expanded, its approach to decisions, research and customer needs also had to evolve.
Regional management organizations were established in Europe and Asia-Pacific in 1988, followed by North America in 1989. The 1990 name change reinforced a shared corporate identity that was easier to use internationally. These dates describe stages in regional management organization; they should not be mistaken for the first time Omron conducted business overseas.
1987 onward: Fuzzy logic and image processing
High-speed fuzzy-controller work in 1987 explored control decisions based on graded assessments as well as precise thresholds. Fuzzy logic and PID control are different methods, and fuzzy logic should not be treated as equivalent to every form of modern artificial intelligence. This distinction is useful when interpreting the word “fuzzy” in older product documentation.
Omron's chronology also records in-line inspection and circuit-board solder inspection in the 1990s. Moving from detecting whether a part is present to evaluating its shape, position or manufacturing defects shows how sensing expanded through image processing. Inspecting quality within the production line is an application approach intended to reduce the movement of defective parts into later stages.
2011: Sysmac NJ and integrated machine control
The Sysmac NJ series, introduced in July 2011, brought logic, motion and networking into an integrated approach to machine control. The subsequent NJ/NX platform and Sysmac Studio combined programming with the configuration of connected equipment. Programming methods such as Structured Text help express more complex machine behavior.
EtherCAT plays an important role in cyclic communications with motion and field devices, including EtherCAT servo systems. EtherNet/IP is a different industrial networking technology. Sharing an Ethernet foundation does not make the two interchangeable. Available functions depend on the controller, connected devices and system configuration.
Understanding different software generations
Omron's CS, CJ and CP PLC families and its NJ/NX machine controllers represent different generations under one brand. The tools within CX-One and Sysmac Studio do not have identical target devices or project structures. Choosing PLC programming software or an Omron PLC connection cable therefore requires attention to the CPU family, port and supported engineering tool. Historical continuity does not imply automatic compatibility between every generation.
2015–2017: Robotics, motion control and traceability
The acquisition of Adept Technology was completed on October 23, 2015. Adept's industrial and autonomous mobile robotics expertise joined Omron's sensing and control capabilities. Delta Tau also joined the group that year, expanding motion-control expertise. The interaction of sensors and actuators in robotics illustrates the technical connection: detecting a part, calculating movement and performing physical work are tasks within a coordinated system.
Sentech and Microscan joined the group in 2017, strengthening industrial-camera and code-reading capabilities. Reading a barcode or two-dimensional code and associating it with a production record creates traceability, rather than simply capturing an image. Automation can therefore extend from operating a machine to recording which part was processed, when it was processed and under what conditions.
2019–2023: A changing business portfolio and healthcare data
Nidec completed its acquisition of Omron Automotive Electronics on October 31, 2019, and the business became Nidec Mobility. This change matters when interpreting older Omron automotive products in relation to the company's later activities. A business that once belonged to the group does not necessarily remain under the same ownership throughout its subsequent history.
The acquisition of a controlling stake in JMDC in 2023 marked an expansion in healthcare data and data solutions. JMDC became a subsidiary through the October transaction; it would be inaccurate to describe this as the purchase of every share. Data obtained from measurement devices and broader healthcare-data analysis are related activities, but they require different expertise.
2024–2026: Restructuring and the Aratas distinction
The NEXT 2025 structural reform program began in 2024. Omron's 2025 Integrated Report explicitly discusses rebuilding its foundations for profitability and growth following a deterioration in business performance. Its recent history therefore includes decisions about allocating resources and reorganizing existing activities alongside acquisitions and technology development.
The Device & Module Solutions business was transferred into Aratas Corporation on July 1, 2026. The transfer of Aratas shares to Carlyle-affiliated TCG2602 was completed on October 1, 2026. Describing DMB as an unchanged Omron business unit would therefore misrepresent the position at that date. This transaction should also be distinguished from a sale of Omron's entire industrial automation business.
How this history comes together on a production line
On a packaging line, a sensor might detect an arriving product, a controller manage the sequence, a servo position an axis and a camera inspect a label. Temperature controllers within Omron's automation offering can regulate a sealing process, while counters track production quantities. This example illustrates how capabilities developed during different periods can contribute to one machine.
An operator uses an HMI panel to view settings and alarms, while a plant-level SCADA system can monitor several machines. Industry 4.0 and industrial IoT concern access to this information and its practical use. A communication port alone does not automatically provide all these functions. Understanding Omron's history is useful because it reveals how these responsibilities connect across a system, beyond the names printed on individual products.
Related topics: PLC technology, sensors, temperature control and operator panels.
Sources and historical review: October 16, 2026
OMRON: official chronology; OMRON: the founder’s early years; OMRON: early products and postwar rebuilding.
OMRON: development of relays, switches and automation; Origin of the OMRON name; OMRON: development of the contactless switch.
OMRON: traffic and station automation; IEEE: collaborative development of railroad ticket examination; OMRON: SINIC, SYSMAC, fuzzy logic and image processing.
OMRON Healthcare: HEM-1 and healthcare history; OMRON Healthcare: product development history; OMRON: health engineering and accessible manufacturing.
OMRON: management change and international identity; OMRON Türkiye: technical scope of the Sysmac platform; OMRON Türkiye: software and supported device families.
SEC archive: Adept merger filing dated October 23, 2015; OMRON: completion of the Adept acquisition; Nidec: completion of the automotive electronics acquisition.
OMRON: results of the JMDC tender offer; OMRON Integrated Report 2025: management and restructuring history; OMRON: completion of the Aratas transfer on October 1, 2026.