6ES7 158-3AD00-0XA0

6ES7 158-3AD00-0XA0 – Siemens SIMATIC PN/PN Coupler

Series: Siemens SIMATIC / PN/PN Coupler
Category: Data coupler between two PROFINET IO networks

Description and system role

6ES7 158-3AD00-0XA0 is a Siemens PN/PN coupler for transferring data between two independent PROFINET IO networks. Each side is configured as an IO device for its respective IO controller. Output data from one PLC side becomes input data on the other.

For example, two machines can exchange ready signals, operating permissions or production counters. The project must define which data is exchanged, what each byte means and how the application responds if communication is lost.

Data capacity, ports and power supply

The 3AD00 supports up to 256 input bytes, 256 output bytes and 16 I/O data areas. Network sides X1 and X2 each have two RJ45 ports: four ports serving two PROFINET IO networks. Communication operates at 100 Mbit/s full duplex.

The supply rating is 24 V DC, with a permissible range of 20.4–28.8 V DC. Two separate power supplies can provide redundant power. Check the existing cabinet supplies and confirm whether the power connectors are included with the unit.

SIMATIC Micro Memory Card requirement

This version requires a SIMATIC Micro Memory Card for operation. A 64 KB card is sufficient for device names; 6ES7 953-8LF11-0AA0 is among the cards listed in the manual. Firmware updates require a card of at least 2 MB.

When buying a used coupler, ask whether the card is included and request its complete order number. Record the coupler's product version before selecting a replacement card; capacity alone should not determine the choice.

Data mapping and version differences

Matching slots on both sides must use equal-length, complementary input/output areas. For example, an 8-byte output area on machine A maps to an 8-byte input area on machine B. Transfer in the reverse direction requires a separate mapping. During commissioning, send a known test value in each direction to check addressing and data interpretation.

The model can transfer PROFIsafe data within an appropriate F-CPU and safety-program configuration. Configure the safety application according to the relevant Siemens F-system documentation. When selecting functional and safety modules, distinguish the coupler's data-transfer role from the safety controller's role.

The 3AD00 and later couplers do not share the same feature set. The 03/2009 manual for the 3AD01 identifies IRT and data-record transfer as new features. Compare the full order number with the existing project before selecting a replacement. The 6ES7 158-0AD01-0XA0 DP/DP coupler is a PROFIBUS product; establish the required PROFIBUS or PROFINET interface first.

Editor's Note

For a used unit, request a test demonstrating data exchange on both network sides. An illuminated LINK indicator alone does not establish correct application-data transfer. Review photographs of the label, MMC, RJ45 sockets and power connectors together, and record which PLCs and project were used for the test.

PDF documentation and manuals

See Siemens ET 200 PDF documentation and user manuals for relevant documents. The primary reference for this model is PN/PN Coupler, 08/2006. Its appended 03/2007 product information covers additional MMC cards supported from product version 2. For safety applications, also consult S7 Distributed Safety, 07/2013, section 8.6.

Related topics

For control and monitoring equipment, explore PLC and HMI, operator panels and SCADA. The Siemens S7-300 and About Siemens ET 200 sections may also help when identifying existing system components.

Other product groups: ET 200 digital input modules · Digital output modules · Analog input modules · Connection modules · Additional modules.

Navigation: Siemens ET 200 · Siemens SIMATIC S7 · Siemens S7 PLC · OtomasyonAVM home