Simatic ET200

Siemens ET 200

Siemens ET 200 Module Types and System Structure

Siemens SIMATIC ET 200 is a family of distributed input/output (I/O) systems connecting machine sensors and actuators to the control system. It includes solutions for installation inside control cabinets and directly on machines. Within the ET 200 system structure, input, output, communication, power and technology components are selected for the application. Models with a CPU can also execute the user program.

ET 200S, ET 200M, ET 200SP and ET 200MP use different module and terminal arrangements. ET 200M uses compatible S7-300 modules, while ET 200MP uses compatible S7-1500 modules. Components belonging to the ET 200 family are not automatically interchangeable.

Input Modules

Digital input modules (DI) read switching states from pushbuttons, limit switches and compatible sensors. Analog input modules (AI) process current, voltage, resistance or temperature signals, depending on the module. RTD and thermocouple connections require a suitable input type. For special input applications, the measurement type, sampling requirements and diagnostic functions must be checked against the complete article number.

Output Modules

Digital output modules (DQ) switch compatible loads; transistor and relay outputs are available depending on the module. Analog output modules (AQ) provide reference signals to drives and control equipment within their supported current or voltage ranges. For special output applications, functions such as pulse generation and time-controlled switching require a module that supports the intended task. Channel current, load type and output range vary between ET 200 models.

Power Modules and Supply Arrangement

Power supply modules and power distribution components must be considered together when arranging electronic and load supplies. ET 200S can use power modules to establish potential groups. In ET 200SP, a suitable BaseUnit provides the supply connection and starts a potential group; application-specific power modules are also available. Check the external power supply, internal supply components and load current separately.

Interface and Communication Modules

PROFIBUS and PROFINET interface modules exchange data between the ET 200 station and its higher-level controller. Other network interfaces support protocols such as EtherNet/IP or Modbus TCP only on suitable models. Interface modules, CPUs and communication modules perform different tasks. Check the network protocol, controller support, hardware/firmware version and the required GSD or GSDML file together.

Functional and Technology Modules

Functional and technology modules provide application-specific tasks beyond standard signal processing. Counter modules support pulse counting and speed measurement with suitable sensors. Positioning and position detection modules provide functions for supported encoders and motion tasks. Measurement, weighing and time-based I/O capabilities depend on the module options available for the selected ET 200 system.

Safety Modules and PROFIsafe

Fail-safe safety modules (F-I/O) operate with a compatible safety controller and safety program. PROFIsafe provides safety-related communication in supported systems. A PROFINET or PROFIBUS connection alone does not provide a safety function. The F-module, controller, parameters and application safety requirements must be assessed together.

Terminal Blocks and Connection Components

Terminal blocks and connection modules connect field wiring to the electronic modules. ET 200S terminal modules, ET 200SP BaseUnits and ET 200MP front connectors have different designs. Screw, spring-loaded and push-in connection options depend on the component. Check the terminal type, pin assignment, potential group and conductor cross-section in the relevant module documentation.

Module Selection and User Manuals

Select components using the complete article number, ET 200 system type, channel count, signal type, supply requirements, connection base and engineering software support. Additional modules and accessories must also match the station's hardware configuration. For wiring diagrams, technical ratings and installation details, visit the Siemens ET 200 PDF and user manuals page.

Related Topics

About ET 200 · Functional and safety modules · PROFIBUS and PROFINET · PROFIsafe · ET 200 additional modules

Navigation: SIMATIC S7 · Siemens S7 PLC · PLC and HMI · ET 200 manuals

Technical sources: Siemens SIMATIC ET 200 · Siemens ET 200SP · Siemens ET 200MP


Refine Search