6ES5 251-1AA11

Siemens 6ES5 251-1AA11 S5-210 Serial Interface Module

The 6ES5 251-1AA11 is the 251 serial interface module for the S5-210 microcomputer system in the SIMATIC S5 family. Exact-part lists describe this S5 special module as a serial interface. Classic Automation also lists it as a Nahmat OS keyboard interface.

OtomasyonAVM PDF archive

+ Shared Siemens S5 PDF archive

Front connector and serial line

Published photographs show a multi-pin front connector and two rows of red and green LEDs. Label both ends of the cable before removal. Use the machine wiring and service records to identify the pin functions, signal levels, line standard and serial communications settings.

If the installation has a PG cable, USB–RS-232 adapter or RS-485 equipment, identify its destination from the label. Check the 251 connector wiring against the diagram and the settings of the connected device.

Rack, keyboard and spare selection

Record the S5 rack identification and slot in the S5 system records. The 250 PROVIT display interface and 234 memory and parameter module have separate roles within the S5-210 family. Match the spare to the full 251-1AA11 order number, hardware revision and existing front plug.

If keyboard input fails, check whether the operator display starts and whether it registers keystrokes as two separate tests. Where a Siemens panel, used operator panel or IP 255 display card is present, record the destination of the video and keyboard cables.

Record AS 511, AS 512, CP 521 and CP 524 interfaces and processors under their own order numbers in the rack inventory. For the 251 removal and test record, include the S5-210 rack, connected device and front cable.

Editor’s note

Document the connection before removal. Follow the plant isolation procedure. Photograph the front plug orientation, slot, full card label and connected device label.

Trace the keyboard path if the display works but the keys do not. Test the same keyboard and cable in a known-good matching installation. Record which keys produce a response.

Check the cable and connectors if the fault is intermittent. With power isolated, check continuity against the drawing. Inspect for bent pins and a loose connector latch.

Compare the LEDs with a working example. Record the LEDs at startup and during a key press. Use the machine documentation to interpret the indicators.

Compare the first startup after replacement. Use the same peripheral and cable to test startup, keyboard input and the display response in sequence. Confirm any documented line settings against the existing system record.

Ask for a functional test when buying used. Request a clear photo of the complete code and a recording of the S5-210 responding to an attached keyboard command.

To offer a 251-1AA11 for sale, send the full label, a front connector photo and any functional test result to otomasyonavm@gmail.com.

Related topics

+ 6ES5 250-1AA31 PROVIT display interface

+ 6ES5 234-1AD11 S5-210 memory module

+ About Siemens S5 PLC

Navigation

+ S5 Special Modules

+ SIMATIC S5

+ Second-hand Siemens

External references

+ ADEGIS SIMATIC S5 parts list (PDF) · p. 5, exact part and S5-210 serial interface identification.

+ Classic Automation 6ES5 251-1AA11 product record · Nahmat OS keyboard interface listing.

+ SPS-Service 6ES5 251-1AA11 module photograph

+ Siemens S5-210A, 1982 (German family document) · S5-210A system context.