6ES5 250-1AA31

Siemens 6ES5 250-1AA31 · S5-210 PROVIT display and keyboard interface

The 6ES5 250-1AA31 is a PROVIT CRT display and keyboard interface card for the SIMATIC S5 S5-210 microcomputer system. It belongs to the S5 special module range. Display output and operator keystrokes are separate functions in the same installation. When comparing operator panels, record the card order number and the monitor model separately.

Connections and spare selection

A field report identifies the 250-1AA11 as the basic PROVIT display interface and the 250-1AA31 as the variant with a keyboard interface. Label which cable goes to each port and record the rack code. Identify the monitor power supply from the machine drawings. For electrical tests, use the equipment labels and drawings to identify test points and limits. Use a multimeter for continuity only after isolating power and disconnecting both ends of the cable.

The exact variant's pinout, video and sync signals, and keyboard wiring table remain unverified. When buying a used operator display, ask for a test with the same monitor model and a cable suited to the installation. If a touchscreen upgrade is planned, assess the new display input and the keyboard functions separately. Document both connections in the PLC and HMI upgrade drawings.

Identifying S5-210 cards

The same S5-210 parts list shows the 6ES5 251-1AA11 serial interface and the 6ES5 234-1AD11 memory and parameter module as separate items. Document the memory hardware and saved settings before removal. Track the display interface and serial communications separately in the fault report.

The 6ES5 255-3AA11 and 6ES5 255-3AC11 are IP 255 display cards. Compare full order numbers when comparing cards with similar functions. For a spare in an S5 system, match the rack, display, keyboard and cables to the existing installation.

Editor's note

+ When buying a used 1AA31, ask for clear label and socket photos. Ask which monitor and keyboard were used, whether the cable is included and whether both functions were tested.

+ Before removing the card, photograph the rack, slot number and both ends of each cable. Put the machine in a safe state and isolate power according to site procedures before changing connections.

+ If the screen is dark, first check the monitor power status and that the video cable is seated. Then try a known-good monitor of the same model. Change the monitor and cable one at a time and record the result.

+ If the image is stable but the keys do not respond, check the keyboard plug and cable separately. Where the installation allows, use a known-good compatible keyboard and try a menu key that cannot initiate machine movement.

+ If the image rolls or splits, confirm the signal and sync formats accepted by the display and any converter. Match the existing video output to the equipment documentation before selecting a new converter.

+ After replacing the card, verify the startup display, a status page and a safe keystroke separately. Record the card, monitor and cable identifiers in the maintenance log.

To sell a used card, email the full order number, quantity, working or faulty condition, label and socket photos and your asking price to otomasyonavm@gmail.com.

OtomasyonAVM PDF archive

+ Siemens SIMATIC S5 PDF files

Related topics

+ S5-210 6ES5 251-1AA11 serial interface

+ S5-210 6ES5 234-1AD11 memory and parameter module

+ About Siemens S5 PLCs

Used Siemens equipment

+ S5 special modules

+ S5 interface modules

+ Siemens SIMATIC S5 models

+ Used Siemens equipment overview

External references

+ ADEGIS · 6ES5 250-1AA31 exact order number record

+ TPCOVN · SIMATIC S5 parts list, PDF p. 10

+ PLCTalk · PROVIT variants and display fault field report