6ES5 234-1AD11
Siemens 6ES5 234-1AD11 S5-210 Memory and Parameter Entry Module
The Siemens 6ES5 234-1AD11 is a memory and parameter entry board for the S5-210 microcomputer system. The Adegis parts list specifies 12 EPROM sockets and 8 KB of CMOS RAM for this order number. See the Siemens S5 PLC overview for the wider family and the S5 memory card section for other board and cartridge formats.
EPROM sockets and CMOS RAM
The board has 12 physical EPROM sockets. Check the board in the machine to identify the fitted devices, their part numbers and the total installed EPROM capacity. The 8 KB figure applies to the CMOS RAM. These guides to EPROM, how RAM works and SRAM and DRAM provide background on socketed memory and working memory.
When sourcing replacement chips, check how the catalog distinguishes the ROM family, PROM and EEPROM and flash memory. Match the full marking on the original chip to its socket position and the machine parts record before choosing a device.
Connections and system compatibility
Start with the S5-210 system label and the existing board label. The 6ES5 251-1AA11 serial interface board handles serial communication in the same system family. When documenting the cabinet, identify S5 interface modules and S5 cables and connectors separately.
Compare the order number, revision marking if present, rear connector shape and installed slot position before fitting a replacement. The S5 rack, used PLC CPU and PLC power supply sections help identify the other assemblies in the cabinet. Use the machine’s own wiring drawings and parts list to verify this board’s pinout, supply requirements and compatible revisions.
Buying and testing a used board
When reviewing used electronic boards or used memory cards, ask for close-ups of both sides, the full order number and the occupied EPROM sockets. Check for socket corrosion, bent chip leads, damage to the rear connector and signs of rework. Confirm whether the board ships bare or with EPROMs installed and ask for any available test record.
Before replacing the board, record the socket number and notch orientation of each installed EPROM. Use a suitable reader, compare the checksums of two reads and label the saved files by socket. The articles on memory data loss, memory reliability and NVRAM provide background for troubleshooting. The memory FAQ collects those topics in one place.
If you have this board for sale, send photos of the board and its label to otomasyonavm@gmail.com.
Editor’s note
If the Demag parts list shows 065 193 65, ask for a photo that confirms the Siemens order number on the board. Boards marked 6ES5 234-1AD11 can carry EPROM contents specific to the machine. Record the chip locations and back up the original contents before testing the replacement in a compatible system.
Siemens S5 PDF archive
We could not locate a Siemens manual for this exact board. The parts list in the references below gives the full order number and memory specifications. For general documentation, see the shared Siemens S5 PDF archive.
Related topics
6ES5 372-0AA51 EPROM memory submodule · 6ES5 375-0LC31 EEPROM memory module
Examples of other SIMATIC S5 memory hardware.
References
Adegis SIMATIC S5 parts list, PDF p. 4 · Classic Automation S5-210 board listing and photo · LvS Plastic Machines Demag part 065 193 65