Yaskawa JUNMA Pulse
The pulse-input JUNMA family targets simpler servo applications; command wiring and motor pairing must be read from the complete device code.
Tracing a pulse-command axis
In a pulse-command JUNMA axis, the controller sends movement through pulse and direction signals. A different input assignment or electronic-gear ratio can turn the same command into different travel. Record drive parameters and controller output together.
Do not choose a similar SJDE frame without checking motor identification and the power and feedback cables. A networked JUNMA variant is not a drop-in substitute for pulse wiring even if its enclosure fits.
What matters in selection
A pulse-input JUNMA axis depends on command direction, pulse resolution and I/O wiring. A similar-looking networked unit is not a direct substitute for the pulse drive.
Do not assume a pulse-input JUNMA unit needs PC software; verify Yaskawa JunmaWin support for the exact variant.
Technical references: JUNMA SJDE instructions — TOMP C710806 00G. For this family, use SERVOPACK drive manuals to identify the relevant document.
Models and technical distinctions
| Model / frame | Documented distinction |
|---|---|
| SJDE-01APA | Documented SERVOPACK drive designation; verify the exact option suffix and supported system before replacement. |
| SJDE-02APA | Documented SERVOPACK drive designation; verify the exact option suffix and supported system before replacement. |
| SJDE-04APA | Documented SERVOPACK drive designation; verify the exact option suffix and supported system before replacement. |
| SJDE-08APA | Documented SERVOPACK drive designation; verify the exact option suffix and supported system before replacement. |