Yaskawa JUNMA ML-II / OY

JUNMA MECHATROLINK-II and pulse variants do not expose the same interface. JunmaWin support must not be presumed for every submodel.

Separating networked and pulse JUNMA variants

A MECHATROLINK-II JUNMA axis receives motion commands over the network. Pulse wiring and controller outputs from another machine do not become that network connection by changing the drive. Read the complete SJDE designation with the installed controller interface.

Software requirements also depend on the variant. Finding an old JunmaWin project is not proof that this particular drive is supported by the same tool release; check the applicable support list.

What matters in selection

A JUNMA MECHATROLINK-II installation needs matching controller generation and node settings. Read option suffixes such as “OY” against the complete code and the relevant period manual.

For a networked JUNMA, establish Yaskawa JunmaWin support separately from a pulse-input unit.

Technical references: JUNMA MECHATROLINK-II SJDE-ANA-OY data sheet. For this family, use SERVOPACK drive manuals to identify the relevant document.

Models and technical distinctions

Model / frameDocumented distinction
SJDE-01ANA-OYMECHATROLINK-II application; confirm the controller and network generation.
SJDE-02ANA-OYMECHATROLINK-II application; confirm the controller and network generation.
SJDE-04ANA-OYMECHATROLINK-II application; confirm the controller and network generation.
SJDE-08ANA-OYMECHATROLINK-II application; confirm the controller and network generation.

What works with this component?