VF-nC1 toshiba ac drive

Toshiba VF-nC1 AC Drive is a compact legacy inverter series developed for low-power motor applications. Its simple operation panel, built-in frequency-setting potentiometer, PI control, sensorless vector control and preset-speed functions make it suitable for pumps, fans and small industrial machines.
PI control for pump and fan applications
The VF-nC1 includes a PI control function that can be used in pump and fan applications. Process feedback can be provided through common analog signals, including 4–20 mA, allowing motor speed to be adjusted according to pressure, flow or another process variable.
Motor control and low-speed torque
In addition to conventional V/f control, the VF-nC1 supports sensorless vector control. Motor-control parameters such as base frequency, base-frequency voltage and torque boost can be adjusted according to the connected motor and mechanical load.
Sensorless vector control can provide improved low-speed torque performance in small machinery where standard V/f control may not provide sufficient torque at reduced speed.
VF-nC1 power and supply classes
The VF-nC1 family was produced in several supply-voltage classes:
Three-phase 200 V class: 0.1–2.2 kW
Single-phase 200 V class: model-dependent, up to 2.2 kW
Single-phase 100 V class: 0.1–0.75 kW
Single-phase input versions provide a three-phase motor output, allowing standard three-phase motors to be operated from an appropriate single-phase supply within the inverter's rated capacity.
Simple operation and commissioning
The VF-nC1 operation panel includes dedicated RUN and STOP keys together with a front-mounted frequency-setting potentiometer. Basic motor operation can therefore be performed directly from the inverter without requiring an external speed potentiometer.
External control terminals can also be used for functions such as forward/reverse operation, preset speeds, reset, coast stop and other programmable inverter commands.
Built-in Wizard function
The built-in Wizard function helps simplify commissioning by grouping parameters required for common applications. This makes it easier to locate settings for basic operation, analog references, preset speeds and motor-related adjustments.
The function is particularly useful for users who are not yet familiar with the complete VF-nC1 parameter structure.
15 preset speeds
The VF-nC1 supports up to 15 preset operating frequencies. These speeds can be selected using combinations of the programmable digital input terminals and configured within the selected upper and lower frequency limits.
Analog frequency reference
The frequency command can be supplied from the front-panel potentiometer or through an external analog reference. External potentiometers in the 3–10 kΩ range can be used, while analog frequency commands may include 0–10 VDC and 4–20 mA signals.
Additional information about external frequency adjustment is available in our VFD frequency potentiometer section.
PWM carrier frequency
The VF-nC1 PWM carrier frequency can be selected from 2, 4, 8, 12 or 16 kHz. The factory default is 12 kHz.
A higher carrier frequency can reduce audible motor noise. However, depending on inverter model and ambient temperature, output-current derating may be required when higher carrier-frequency settings are used.
EMC filter options
Some European-type single-phase 200 V VF-nC1 models were supplied with a built-in EMC filter. Relevant PL-series models include an integrated Class B EMC noise filter.
Models without an integrated filter may require a suitable external EMC filter depending on the installation and applicable EMC requirements.
Sink / Source control logic
The VF-nC1 control-input logic can be configured for NPN or PNP operation. This allows the inverter to be integrated more easily with different PLCs and industrial automation control systems.
Serial communication
The VF-nC1 can be connected to higher-level control equipment by using the appropriate Toshiba communication accessories. RS-485 communication and RS-232C connections are implemented through suitable optional communication converter units rather than being treated as a standard built-in network port.
Through serial communication, operating frequency, current, voltage and other inverter information can be monitored. RUN / STOP commands can also be transmitted, and supported parameters can be read or modified remotely.
An RS-485 network can also be used to connect multiple VF-nC1 drives to a supervisory controller when the appropriate communication hardware is installed.
International standards
VF-nC1 models were developed for use in international industrial markets, with versions designed to meet requirements associated with standards and approvals such as CE, UL, CSA and C-Tick. The exact approval and EMC status should always be checked against the full inverter model number and installation method.
Compact inverter for existing machinery
Although the Toshiba VF-nC1 is now an older-generation inverter series, it is still found in existing machines and control panels. Its compact construction, front-panel potentiometer, PI control, sensorless vector control and 15 preset speeds made it a practical drive for small industrial motor applications.
For maintenance or replacement work, it is important to record the complete VF-nC1 model number, motor nameplate data and existing parameter settings before removing the original inverter.
Related pages:
- Toshiba Drives Main Page
- AC Drive / VFD Main Page
Refine Search
Vfnc1S-2007-PL-W-220v
220 Volt Power Supply 0.75 Kw Output Single phase High performance Toshiba VF-nC1 Vfd Vfnc1S-2007-PL..
143.00USD Ex Tax: 143.00USD
Vfnc1S-2015-PL-W
220 Volt Power Supply 1.5 Kw Output Single phase High performance Toshiba VF-nC1 Vfd Vfnc1S-2015-PL-..
147.00USD Ex Tax: 147.00USD
Vfnc1S-2022-PL-W-220v
220 Volt Power Supply 2.2 Kw Output Single phase High performance Toshiba VF-nC1 Vfd Vfnc1S-2022-PL-..
148.00USD Ex Tax: 148.00USD
Vfnc1S-2004-PL-W-220v
220 Volt Power Supply 0.4 Kw Output Single phase High performance Toshiba VF-nC1 Vfd Vfnc1S-2004-PL-..
146.00USD Ex Tax: 146.00USD



