TCM09

TCM09 belongs to eTOP300 / UniOP Options and serves as CANopen communication. Its role depends on the host-panel generation and the connection actually used in the cabinet.

For TCM09, check CANopen communication against the exact host-panel configuration. Match its complete code, port and option slot to that installation.

What matters on the installed machine?

TCM09 serves as CANopen communication. Check the actual connector or mounting position and the host-panel generation before selecting it.

Compare TCM09 (CANopen communication) with TCM01 (Siemens MPI communication); similar connectors do not establish the same duty. Test the function after installation on the running system.

Before changing TCM09, record its connector position and the function it provides to the host panel. Test that function after installation with the original communication or mounting arrangement.

For TCM09, confirm that the host supports CANopen communication. Match the part code with the host’s option or mounting requirements. TCM01 may serve another function despite a similar connector. For TCM09, confirm the CANopen master/slave role and target protocol support against the panel release.

Around TCM09, compare TCM02 (Moeller Suconet K communication), TCM07 (Siemens MPI option without optical isolation) and SCM05-C (CODESYS 2.x based PLC + CANopen master). Check each complete code and connection on its own page.

PDF manuals

Documents include EXOR 2015 archive catalogue, UniOP OEM installation guide. For TCM09, match CANopen communication details against eTOP300 / UniOP Options PDF Manuals.