TCM07

TCM07 belongs to eTOP300 / UniOP Options and serves as Siemens MPI option without optical isolation. Its role depends on the host-panel generation and the connection actually used in the cabinet.

For TCM07, check Siemens MPI option without optical isolation against the exact host-panel configuration. Match its complete code, port and option slot to that installation.

What matters on the installed machine?

TCM07 serves as Siemens MPI option without optical isolation. Check the actual connector or mounting position and the host-panel generation before selecting it.

Compare TCM07 (Siemens MPI option without optical isolation) with TCM01 (Siemens MPI communication); similar connectors do not establish the same duty. Test the function after installation on the running system.

Before changing TCM07, record its connector position and the function it provides to the host panel. Test that function after installation with the original communication or mounting arrangement.

For TCM07, confirm that the host supports Siemens MPI option without optical isolation. Match the part code with the host’s option or mounting requirements. TCM01 may serve another function despite a similar connector.

Around TCM07, compare TCM02 (Moeller Suconet K communication), TCM09 (CANopen communication) and SCM05-C (CODESYS 2.x based PLC + CANopen master). Check each complete code and connection on its own page.

PDF manuals

Documents include EXOR 2015 archive catalogue, UniOP OEM installation guide. For TCM07, match Siemens MPI option without optical isolation details against eTOP300 / UniOP Options PDF Manuals.