SCM05-C
SCM05-C belongs to eTOP300 / UniOP Options and serves as CODESYS 2.x based PLC + CANopen master. Its role depends on the host-panel generation and the connection actually used in the cabinet.
For SCM05-C, check CODESYS 2.x based PLC + CANopen master against the exact host-panel configuration. Match its complete code, port and option slot to that installation.
What matters on the installed machine?
SCM05-C serves as CODESYS 2.x based PLC + CANopen master. Check the actual connector or mounting position and the host-panel generation before selecting it.
Compare SCM05-C (CODESYS 2.x based PLC + CANopen master) with TCM01 (Siemens MPI communication); similar connectors do not establish the same duty. Test the function after installation on the running system.
Before changing SCM05-C, record its connector position and the function it provides to the host panel. Test that function after installation with the original communication or mounting arrangement.
For SCM05-C, confirm that the host supports CODESYS 2.x based PLC + CANopen master. Match the part code with the host’s option or mounting requirements. TCM01 may serve another function despite a similar connector.
Around SCM05-C, compare TCM02 (Moeller Suconet K communication), TCM07 (Siemens MPI option without optical isolation) and TCM09 (CANopen communication). Check each complete code and connection on its own page.
PDF manuals
Documents include EXOR 2015 archive catalogue, UniOP OEM installation guide. For SCM05-C, match CODESYS 2.x based PLC + CANopen master details against eTOP300 / UniOP Options PDF Manuals.