S7 300 Analog modules

Siemens S7-300 Analog and Special Signal Modules

Siemens S7-300 Analog and Special Signal Modules

Siemens S7-300 analog modules acquire field measurements for the SIMATIC S7-300 system and send analog commands to process devices. The families include SM 331 analog inputs, SM 332 analog outputs, SM 334/SM 335 mixed analog I/O and SM 336 F fail-safe analog inputs. The SM 321 digital input and SM 338 SSI position acquisition models in this directory are shown separately according to their functions.

Select by more than channel count: compare the 0–10 V / 4–20 mA signal type, RTD or thermocouple support, isolation, resolution, conversion time and 20/40-pin front connector. Pressure sensors, temperature sensors and encoders require different interfaces. The panel power supply and sensor supply must also suit the measurement circuit.

Wiring diagrams, parameters and technical documentation: S7-300 PDF files and manuals.

SM 321 — Digital and NAMUR input modules

6ES7321-7BH80-0AB0 — SM 321 digital input module with 16 DI, 24 V DC, electrical isolation, hardware interrupts and diagnostics. Version for an extended temperature range.

6ES7321-7RD00-0AB0 — Isolated SM 321 module with 4 NAMUR digital inputs and diagnostics. Signals from hazardous areas must be connected in accordance with the applicable Ex certificate and wiring requirements.

6ES7321-7TH00-0AB0 — SM 321 with 16 DI for contacts, NAMUR sensors and suitable 3/4-wire BERO sensors. Features include pulse stretching, chatter monitoring and wire-break diagnostics; used with a suitable IM 153-2 interface.

SM 331 — General-purpose and high-speed analog inputs

6ES7331-1KF01-0AB0 — Isolated SM 331 with 8 AI and 13-bit resolution for voltage, current, resistance, Pt100, Ni100, Ni1000 and LG-Ni1000. Module update time: 66 ms; 40-pin front connector.

6ES7331-1KF02-0AB0 — Isolated SM 331 with 8 AI and 13-bit resolution for voltage, current, resistance and supported RTDs, with additional PTC/KTY support. Module update time: 66 ms; 40-pin front connector.

6ES7331-7HF00-0AB0 — High-speed SM 331 analog input module with 8 AI, 14-bit resolution and voltage/current measurement. Conversion time: 0.052 ms per channel. Diagnostics, interrupts, isochronous operation and a 20-pin front connector.

6ES7331-7HF01-0AB0 — High-speed SM 331 with 8 AI, 14-bit resolution and 0.052 ms per channel. Improved DP cycle time for isochronous operation; voltage/current measurement, diagnostics and a 20-pin front connector.

6ES7331-7KB00-0AB0 — Isolated SM 331 with 2 AI for voltage, current, thermocouples and resistance. Resolution of 9/12/14 bits depending on measurement settings; interrupts, diagnostics and a 20-pin front connector.

6ES7331-7KB01-0AB0 — Isolated SM 331 with 2 AI for voltage, current, thermocouples and resistance; 9/12/14-bit resolution, interrupts and diagnostics. Check the hardware revision against the existing project.

6ES7331-7KB02-0AB0 — Isolated SM 331 with 2 AI and 9/12/14-bit resolution for voltage, current, thermocouples and resistance. Interrupts, diagnostics and a 20-pin front connector; module replacement supported with a suitable active backplane system.

6ES7331-7KB81-0AB0 — SM 331 for an extended temperature range; 2 isolated AI, 9/12/14-bit resolution, voltage/current/thermocouple/resistance measurement, interrupts and diagnostics.

6ES7331-7KB82-0AB0 — SM 331 for an extended temperature range; 2 isolated AI, 9/12/14-bit resolution, voltage/current/thermocouple/resistance measurement, interrupts and diagnostics; 20-pin front connector.

6ES7331-7KF00-0AB0 — Isolated SM 331 with 8 AI for voltage, current, thermocouples and resistance; 9/12/14-bit resolution, interrupts and diagnostics. The usable channel count depends on the measurement connection selected.

6ES7331-7KF01-0AB0 — Isolated SM 331 with 8 AI for voltage, current, thermocouples and resistance; 9/12/14-bit resolution, interrupts and diagnostics. Compatibility with other revisions in the same family must be checked separately.

6ES7331-7KF02-0AB0 — Isolated SM 331 with 8 AI and 9/12/14-bit resolution for voltage, current, thermocouples and resistance. Interrupts, diagnostics, a 20-pin front connector and module replacement with a suitable active backplane system.

6ES7331-7NF00-0AB0 — Isolated SM 331 with 8 AI and 16-bit resolution; ±5 V, ±10 V, 1–5 V, ±20 mA, 0–20 mA and 4–20 mA ranges. A 55 ms conversion setting and a 40-pin front connector; observe common-mode limits when wiring.

SM 331 — RTD and thermocouple inputs

6ES7331-7PF00-0AB0 — SM 331 resistance/RTD input module with 8 AI and 2/3/4-wire connection. Supports Pt100/200/1000, Ni100/120/200/500/1000 and Cu10. 16-bit data, internal 24-bit conversion, 50 ms and a 40-pin front connector.

6ES7331-7PF01-0AB0 — SM 331 resistance/RTD input module with 8 AI, 2/3/4-wire connection and Pt, Ni and Cu10 sensor support, plus additional GOST characteristics. 16-bit data, internal 24-bit conversion, 50 ms and a 40-pin front connector.

6ES7331-7PF10-0AB0 — SM 331 thermocouple input module with 8 AI for types B/E/J/K/L/N/R/S/T; 16-bit resolution, 50 ms and a 40-pin front connector.

6ES7331-7PF11-0AB0 — SM 331 thermocouple input module with 8 AI for B/E/J/K/L/N/R/S/T and GOST TXK/TXK(L) characteristics. 16-bit resolution, 50 ms and a 40-pin front connector.

SM 331 — Ex signal and HART analog inputs

6ES7331-7RD00-0AB0 — Isolated SM 331 with 4 AI, 0–20 mA/4–20 mA ranges, diagnostics and a 20-pin front connector. Ex wiring requirements apply to signals from hazardous areas.

6ES7331-7SF00-0AB0 — SM 331 with 8 thermocouple inputs or 4 Pt100 inputs, isolation, diagnostics and a 20-pin front connector. Sensor and wiring suitability must also be assessed for Ex applications.

6ES7331-7TB00-0AB0 — SM 331 HART analog input module with 2 AI, 0–20 mA/4–20 mA HART, for ET 200M with a suitable IM 153-2 interface; 20-pin front connector.

6ES7331-7TF00-0AB0 — SM 331 HART analog input module with 8 AI, 0–20 mA/4–20 mA HART, for ET 200M with a suitable IM 153-2 interface; 20-pin front connector.

6ES7331-7TF01-0AB0 — SM 331 HART analog input module with 8 AI, 0–20 mA/4–20 mA and a 20-pin front connector. Supports firmware updates, HART secondary variables, redundancy and a timestamped diagnostic buffer in a compatible system; check PCS 7/IM 153-2 version compatibility.

SM 332 — Analog output modules

6ES7332-5HB01-0AB0 — Isolated SM 332 with 2 AO, voltage/current output, 11/12-bit resolution and a 20-pin front connector. Supports module replacement with a suitable active backplane system.

6ES7332-5HB81-0AB0 — SM 332 for an extended temperature range; 2 isolated AO, voltage/current output and 11/12-bit resolution.

6ES7332-5HD00-0AB0 — Isolated SM 332 with 4 AO, voltage/current output, 11/12-bit resolution, diagnostics and a 20-pin front connector.

6ES7332-5HD01-0AB0 — Isolated SM 332 with 4 AO, voltage/current output, 11/12-bit resolution, diagnostics and a 20-pin front connector. Supports module replacement with a suitable active backplane system.

6ES7332-5HF00-0AB0 — Isolated SM 332 with 8 AO, voltage/current output, 11/12-bit resolution, diagnostics and a 40-pin front connector. Supports module replacement with a suitable active backplane system.

6ES7332-5RD00-0AB0 — Isolated SM 332 with 4 AO, 0–20 mA/4–20 mA, diagnostics and a 20-pin front connector. Applicable Ex requirements govern signal circuits connected to hazardous areas.

6ES7332-5TB00-0AB0 — SM 332 HART analog output module with 2 AO, 0–20 mA/4–20 mA HART, for ET 200M with a suitable IM 153-2 interface; 20-pin front connector.

6ES7332-7ND00-0AB0 — SM 332 with channel-to-channel isolation, 4 AO and 15-bit resolution. Ranges: 0–10 V, 1–5 V, ±10 V, ±20 mA, 0–20 mA and 4–20 mA; 20-pin front connector.

6ES7332-7ND01-0AB0 — SM 332 with channel-to-channel isolation, 4 AO, 15-bit resolution and isochronous operation. Ranges: 0–10 V, 1–5 V, ±10 V, ±20 mA, 0–20 mA and 4–20 mA; 20-pin front connector.

6ES7332-7ND02-0AB0 — SM 332 with channel-to-channel isolation, 4 AO, 16-bit resolution, isochronous operation and improved DP cycle time. Ranges: 0–10 V, 1–5 V, ±10 V, ±20 mA, 0–20 mA and 4–20 mA; 20-pin front connector.

6ES7332-8TF00-0AB0 — SM 332 HART analog output module with 8 AO, 0–20 mA/4–20 mA HART, for ET 200M with a suitable IM 153-2 interface. Verify advanced HART/PCS 7 functions against the hardware and firmware version of this exact order number.

SM 334 and SM 335 — Mixed analog modules

6ES7334-0CE00-0AA0 — Non-isolated SM 334 analog input/output module. Check channel, measurement range and wiring details in the documentation for this older revision.

6ES7334-0CE01-0AA0 — Non-isolated SM 334 with 4 AI/2 AO and a 20-pin front connector. Supports module replacement with a suitable active backplane system.

6ES7334-0KE00-0AB0 — Isolated SM 334 with 4 AI/2 AO and 12-bit resolution; 0–10 V, a Pt100 measuring range of −120…+155 °C and 10 kΩ resistance measurement; 20-pin front connector. This temperature range is a measurement range, not the module's ambient rating.

6ES7335-7HF00-0AB0 — Order number requires verification. This code is listed as SM 335 in the source list, but its specifications could not be confirmed against a manufacturer record. Check the device label and complete MLFB before selection.

6ES7335-7HG01-0AB0 — High-speed SM 335 mixed analog module; isolated 4 AI/4 AO, 14-bit inputs, 11/12-bit outputs, voltage/current, interrupts and diagnostics; 20-pin front connector. Check the manual for this revision's interference-filter requirements.

SM 336 F — Fail-safe analog input

6ES7336-4GE00-0AB0 — SM 336 F with 6 fail-safe analog inputs, 0/4–20 mA and HART; catalog resolution of 15 bits and a 20-pin front connector. Suitable for applications up to SIL 3 / PL e within an appropriately configured fail-safe system.

SM 338 — SSI position acquisition modules

6ES7338-4BC00-0AB0 — SM 338 signal module for reading absolute position data from three SSI sensors. Includes two freeze inputs for capturing position values at an event.

6ES7338-4BC01-0AB0 — SM 338 for three SSI sensors, with two freeze inputs, a 20-pin front connector and isochronous operation. It is a position acquisition module rather than a conventional analog input module.

Selection and replacement considerations

Complete order number and revision: Modules in the same SM family are not automatically interchangeable. Check the hardware configuration in the existing PLC project together with the CPU/IM version, channel parameters and front connector wiring. Resolution is not measurement accuracy; filtering and integration settings can change response time.

Replacement with an active backplane: A module supporting this function does not mean that every module in a standard S7-300 rack can be removed while powered. Replacement depends on a suitable ET 200M active backplane, interface module and system configuration. Ex and fail-safe modules also require their applicable wiring and safety conditions to be met.

PDF files and technical documentation

Use the S7-300 PDF files and manuals section for S7-300 wiring and operating documentation. Match the manual to the complete order number and hardware version shown on the device label.

Related topics and categories

S7-300 main page  |  S7-300 CPU modules  |  Digital input modules

Digital output modules  |  Special and function modules  |  S7-300 memory cards

Siemens S7 PLC range  |  Used Siemens products  |  Sensors and measurement

HMI operator panels  |  Second-hand main page  |  OtomasyonAVM home

Manufacturer references

Siemens — S7-300 Module Data  |  Siemens — Front Connector Selection  |  Siemens — SM 335


Refine Search


Siemens 6ES7 332-5HB01-0AB0

Siemens 6ES7 332-5HB01-0AB0

Siemens 6ES7332-5HB01-0AB0 is a two-channel SM 332 analog output module for SIMATIC S7-300 systems. ..

188.00USD Ex Tax: 188.00USD

Showing 1 to 1 of 1 (1 Pages)