6ES7331-7PF01-0AB0

Siemens 6ES7331-7PF01-0AB0 – SM 331 RTD and Resistance Input Module

6ES7331-7PF01-0AB0 is a Siemens SIMATIC S7-300 SM 331 analog input module for 8-channel RTD and resistance measurement. It supports 2-, 3- and 4-wire sensor connections and uses a 40-pin front connector. When selecting from the S7-300 analog module range, check the sensor type, characteristic curve, wiring method, channel requirement and hardware compatibility together.

Supported sensors and measurement types

The module supports Pt100, Pt200, Pt500 and Pt1000; Ni100, Ni120, Ni200, Ni500 and Ni1000; and Cu10 resistance thermometers. Direct resistance measurement offers 0–150 Ω, 0–300 Ω and 0–600 Ω ranges. The selected sensor characteristic and measuring range must match the installed probe.

It does not provide 0–10 V, 4–20 mA or thermocouple measurement inputs. Receiving a transmitter's current signal and measuring an RTD element directly require different input hardware. In particular, distinguish the 7PF01 RTD model from the 7PF11 thermocouple model.

Effects of 2-, 3- and 4-wire connections

Two-wire measurement has no lead-resistance correction, so cable and connection resistance contribute to the reading. Three-wire installations depend on balanced lead resistance; four-wire installations require correct separation of the current and sensing connections. Follow the Siemens wiring diagram for terminal bridges and connection arrangements.

In an existing Siemens S7 project, check the RTD type, standard/climate range, temperature unit and interference suppression setting. The value interpreted by the PLC and the indication on the HMI panel must use the same scale. An incorrect sensor setting can produce a wrong temperature even when the module is healthy.

Resolution, supply and isolation

Inputs: 8 AI in four channel groups. Rated supply: 24 V DC. Measurement data resolution: up to 16 bits including sign. The product description's “internal 24-bit” specification does not mean that a 24-bit measurement word is transferred to the PLC. Front connector: 40 pins.

Electrical isolation is provided between groups of two channels; the eight individual channels are not all isolated from one another. Isolation is also provided between the inputs and the backplane bus and electronics supply. The module supports configurable diagnostics, limit alarms and a red SF fault indicator. Check the 24 V panel power supply and reference connections when investigating measurement problems.

Used module selection and measurement tests

Before purchase, inspect the complete order number, hardware revision, 40-pin connector and terminal condition. Test all eight channels at several points using an RTD simulator or precision resistance box suitable for the selected sensor characteristic. A reading from one probe at one temperature does not establish the accuracy of every channel.

Assess reading stability, differences between channels and diagnostic status during testing. Separate faults in the sensor and field wiring from faults in the module. Confirm stock, test scope, repair history and included accessories for the particular unit.

PDF files and technical documentation

Use the S7-300 files section for wiring diagrams and manuals. Refer to the section for 6ES7331-7PF01-0AB0 / SM 331 AI 8 x RTD.

Related topics and product groups

S7-300 overview  |  S7-300 CPU modules  |  Digital input modules

Digital output modules  |  Function modules  |  Analog module range

Used Siemens products  |  Used equipment overview  |  OtomasyonAVM home

Manufacturer references

Siemens – 6ES7331-7PF01-0AB0 product information  |  Siemens – SM 331 AI 8 x RTD wiring and module data