6ES7 142-1BD11-0XB0

Siemens main menu › SIMATIC S7 family › ET 200 › Digital output modules

6ES7 142-1BD11-0XB0 — Siemens ET 200X BM142, 4 DO 24 V DC / 2 A Basic Module

6ES7 142-1BD11-0XB0 is an ET 200X BM142 basic module in the Siemens SIMATIC product family. It provides 4 digital outputs at 24 V DC, with a nominal rating of 2 A per channel. Within ET 200 distributed I/O systems, identify it by its complete order number when assessing an existing ET 200X station or selecting a spare.

Five checks before selection

1. Basic module and network: BM142 is the basic module of a PROFIBUS DP station. When comparing PROFIBUS and PROFINET interfaces, check the network type alongside the order number. Record the device configuration, station address and I/O addresses in the Siemens S7 control system project. These records provide a useful reference when commissioning a replacement.

2. Output loads and supply: When selecting ET 200 digital output modules, assess the 2 A per-channel nominal rating against both continuous load current and pickup current. List the loads that operate simultaneously when planning the ET 200 power supply arrangement. Adding the four channel ratings does not establish the permitted total current; verify total loading, temperature and connection limits against documentation applicable to the exact product version.

3. Expansion and product version: The Siemens manual specifies product version 05 or later for this BM142 when used with the EM142 6ES7142-1BD40-0XB0 expansion module. When reviewing ET 200 expansion options, do not rely on the BM142 designation alone. Also check the individual compatibility list when selecting analog input module options. Include the version marked on the module label alongside the order number in maintenance records.

4. Field connections and installation: Assess ET 200 connection components against the installed cable and connector arrangement. The Siemens commissioning checklist calls for checks of bus termination, shielding, mechanical fastening and caps on unused sockets. Switch off the 24 V supply before replacing a module. Label cables and socket positions before disconnection to reduce reconnection errors.

5. Model-specific diagnostics: The diagnostic structure for this order number is described in Table 5-23 of the ET 200X manual. It covers low sensor/logic supply, an inaccessible expansion module, missing or low load supply, and parameter assignment errors. An output command does not prove that a load has moved; also monitor available digital input feedback signals. Start by checking supply measurements and the project configuration to narrow down the fault.

Editor’s note

The version number is a functional selection criterion for this model. Siemens lists direct communication support from product version 08. This differs from the version 05 requirement specified for the EM142 expansion module. When selecting a spare, compare the complete order number, product version and required function together.

PDF and technical documentation

Visit the Siemens ET 200 PDF and user manual library for the documentation guide. Use the ET 200X system manual, 02/2003, EWA 4NEB 780601602-06, together with the A5E00144646-02 commissioning checklist. Search the system manual for the complete 6ES7142-1BD11-0XB0 order number, paying particular attention to Table 5-23 on printed page 5-52 and the version requirements for the selected expansion module.

Related topics

Terminal bases • Connection modules • Digital inputs • Digital outputs • Power distribution • Additional modules

Otomasyon AVM • Siemens guide

Siemens main menu  |  SIMATIC S7 family  |  ET 200 module categories  |  ET 200 PDF archive