6ES7 953-8LL11-0AA0

6ES7 953-8LL11-0AA0 – Siemens 2 MB Micro Memory Card

Series: SIMATIC S7
Category: SIMATIC Micro Memory Card (MMC), 2 MB

Description and applications

6ES7 953-8LL11-0AA0 is a Siemens SIMATIC Micro Memory Card with 2 MB capacity and 3.3 V Nflash memory. It is used with compatible S7-300, C7 and ET 200S IM151 CPU devices. Its role within a SIMATIC S7 system depends on the memory functions supported by the host device.

In a CPU application, it provides load memory for the user program and system data. When selecting a memory card, check the complete device order number, card type and firmware version alongside capacity. This MMC is not supported by every ET 200 device.

Card capacity and CPU work memory

Capacity: 2 MB. Card type: SIMATIC MMC. Memory technology: Nflash. Card voltage: 3.3 V. The card receives power through the compatible device's slot; it must not be connected directly to the cabinet's 24 V power supply.

A 2 MB card does not give the CPU 2 MB of work memory. The CPU's work memory is a separate hardware specification. For example, the IM151-8 PN/DP CPU has integrated work memory that cannot be expanded. A larger card therefore cannot resolve a program's shortage of work memory.

Role within an ET 200 station

Within an ET 200 system, a CPU and a communication interface may use the card for different purposes. A CPU can use it for program storage, while a compatible PROFINET interface may use it to retain the device name or perform supported maintenance operations.

For example, the manual for IM151-3 PN High Feature 6ES7 151-3BA23-0AB0 states that 64 KB is sufficient to store the device name, but a firmware update requires an MMC of at least 4 MB. This 2 MB card therefore does not meet that interface's firmware-update requirement. Device compatibility and capacity for the intended operation must both be checked.

Program loading and card replacement

Back up the existing PLC program, hardware configuration and required project files before starting. Installing an empty card does not recreate the machine's program. Prepare a replacement using the project for the correct machine and device version.

Do not format a SIMATIC MMC in Windows. Formatting it with a standard card reader can make it unusable in an S7 CPU. Use the procedures supported by the Siemens device and programming equipment. Never remove the card during a write operation; follow the host device's instructions for stopping the controller and disconnecting power before replacement.

Commissioning and fault assessment

After replacing the card, compare the configured addresses and physical sequence of the digital input, digital output and analog input modules. A readable card containing the wrong project can still leave the machine unable to operate correctly. Include field connections and additional station components in the review.

A communication alarm on an operator panel or SCADA system does not by itself identify a faulty card. Check the CPU diagnostics, loaded program, device name and network settings. For a used card, inspect the label, contacts and housing, and, where possible, verify reading, writing and restart behaviour in a compatible device.

Editor's Note

Ask two separate questions when buying this card: Does the card work, and is its program intended for my machine? A serviceable card may contain another machine's program. Whether 2 MB is sufficient also depends on the intended operation. Match the full label to the device model, and verify the existing backup before erasing any content.

PDF documentation and user manuals

Refer to the Memory concept chapter of the IM151-8 PN/DP CPU manual and the SIMATIC Micro Memory Card section of the IM151-3 PN High Feature manual for device-specific use. Visit Siemens ET 200 PDF and user manuals for the documentation page.

Related topics

S7-300 memory cards · S7-300 CPU modules · Siemens S7-300 · ET 200 system structure · ET 200 interface modules

Quick links: Siemens ET 200 · Siemens S7 · Siemens S7 PLC · PLC and HMI · OtomasyonAVM home