6ES5 374-1FJ21

Siemens 6ES5 374-1FJ21 SIMATIC S5 Short Flash EPROM Card, 512 KB

The Siemens 6ES5 374-1FJ21 is a 512 KB, 16-bit (word-organised), short-format Flash EPROM memory card for SIMATIC S5. This generation uses 5 V for reading and 12 V for programming. Siemens lists it as program memory for the S5-115U CPU 945 and as PROFIBUS configuration memory for the IM 308-C.

The CPU 945 loads the card’s program into internal CPU memory at power-up or after an overall reset. If data blocks originally loaded from Flash have changed during operation, the next load can restore the older values from the card. Before servicing, use the PG connection to save a CPU backup and keep it separate from the card readback.

How much of the card can the CPU 945 use?

For the S5-115U CPU family, Siemens specifies 256 or 384 KB of usable space on the 1FJ21, depending on the CPU version. The ST 50 catalog lists 256 KB of internal RAM for the 6ES5 945-7UA13 and 384 KB for the 6ES5 945-7UA23. Check the program size against the installed CPU.

In a CR 700-2 S5 rack such as the 700-2LA11 or 700-2LA12, the card fits the receptacle on the front of the CPU. The CPU 945 manual specifies power off for card insertion and removal.

What the card stores in an IM 308-C

Table G-1 of the ET 200 manual lists the 1FJ21 as a 512 KB Flash EPROM option for the 6ES5 308-3UC11 IM 308-C. In this PROFIBUS DP master, the card holds the DP master system configuration. Use File → Export → Memory Card in COM PROFIBUS to write the configuration. The ET 200 manuals cover configuration transfer and card replacement separately.

Programming and similar cards

The CPU 945 memory table lists Word organisation and submodule ID 500. To write a STEP 5 program, use the S5-DOS EPROM/EEPROM package on a programming device that supports 12 V cards. Siemens specifies the 6ES5 985-2MC11 adapter when the PG has no S5 memory card receptacle.

The 374-1FH21 is a 256 KB short card from the same generation. The 374-1KG11, 374-1KH21 and 374-1KK21 belong to the 5 V only generation. The CPU 945 table also lists the 512 KB 374-1KJ11, with Byte organisation. Match the order number and memory organisation as well as the capacity when selecting the card on the programmer.

Among the long cards, the 374-2FH21 belongs to the earlier generation. The 374-2KH21, 374-2KK21 and 374-2KL21 are long 5 V Flash options. Check the form factor and programming voltage when selecting a spare.

Editor’s note

Photograph the label. Record the 1FJ21 suffix, the short card format and the order number of the unit it came from.

Back up the running blocks before an overall reset. Compare any modified data blocks with the copy stored in Flash.

Check the programmer before writing. Confirm 12 V programming support and the selected card type. Read back the programmed contents and compare them with the source.

Label the backup with its host device. Keep the CPU 945 STEP 5 project and the IM 308-C COM PROFIBUS configuration in separate files.

Read the IM 308-C’s IF indicator alongside RN and OF. If IF is on while RN and OF are off, check that the correct card is fitted and contains the master system data. If those checks pass, refer to the IM 308-C fault table in the ET 200 manual.

OtomasyonAVM resources and PDFs

SIMATIC S5 memory cards · About Siemens SIMATIC S5 PLC systems

OtomasyonAVM SIMATIC S5 PDF manual archive · Siemens ET 200 manuals and PDF archive

Related topics

374-1FH21 256 KB Flash EPROM · S5-115U CPU 945 7UA23 · IM 308-C PROFIBUS DP

Browse SIMATIC S5

Siemens SIMATIC S5 · S5 memory cards · S5-90U–115U CPUs

Siemens and other external references

Siemens S5-115U CPU 945 Manual, memory table · CPU 945 Manual, program transfer and PG adapter

Siemens ET 200 Distributed I/O System Manual, IM 308-C ordering table

Siemens 4202137 technical notice for Flash cards (German, 12 V and 5 V card generations) · USB Prommer memory card list