6ES5 948-3UA11

Siemens 6ES5 948-3UA11 — S5-155U CPU 948-1, 640 Kbytes RAM

Siemens 6ES5 948-3UA11 is a CPU 948-1 central processing unit for SIMATIC S5-155U, identified by its exact order number with 640 Kbytes of internal user RAM. This CPU in the Siemens S5 family executes logic, arithmetic and data-processing tasks for machine and process control.

Field signals are handled through separate digital input and digital output modules. The manual’s limit of 1024 inputs and 1024 outputs with the process image describes addressing capacity, not terminals built into the CPU. The actual I/O arrangement depends on the rack and installed modules.

640 Kbytes of RAM and Flash EPROM

The 640 Kbytes are internal working memory for program and data. RAM and the removable S5 memory card serve different purposes. Siemens explains that an overall reset erases existing RAM contents and, if a card is inserted, copies its contents into internal RAM.

The CPU 948 ordering table includes 6ES5 374-2KH21 — 256 Kbytes among the Flash EPROM options. Card capacity is not a RAM expansion added to the CPU’s 640 Kbytes. Check separately whether the selected card can store the complete application.

Rack installation, dimensions and internal supply

The CPU occupies two slots in a suitable S5-135U/155U central rack. Dimensions are 40.6 × 233.4 × 160 mm, with a weight of approximately 1 kg. Assess the central rack layout, power supply and cooling together.

The backplane supplies the CPU with 5 V DC ±5%. The rack power supply’s mains or 24 V DC input is not a voltage to apply directly to the CPU. Its two PCBs form one assembly and must not be separated during maintenance.

TTY programmer port and second interface

The integral SI1 programmer port uses TTY; the serial PG transmission rate is 9600 bps. Select a matching programmer interface and PG cable. Connector shape alone does not establish electrical compatibility.

The second serial connection requires an interface submodule. Siemens lists the 6ES5 752-0AA53 PG submodule and 6ES5 752-0AA22 V.24/RS-232 submodule among the options. SI2 functionality depends on the fitted submodule and software configuration; an empty receptacle is not an operational communications port.

STEP 5, timers and function blocks

Programming uses STEP 5, with SCL also supported in a suitable software arrangement. CPU 948 provides 256 timers and 256 counters, with cyclic, time-controlled and interrupt-driven program execution.

When replacing a CPU in an S5 system, also check the standard function blocks used by intelligent I/O modules. ST 50 requires at least V2.2 for IP 240 FB 167–173 and A04 for IP 241 FB 156–158 with CPU 948. Successfully loading a program does not establish that older FB versions are suitable.

Diagnostics and differences between part numbers

During fault-finding, evaluate RUN, STOP and SYS FAULT together with QVZ, ADF, ZYK and BASP indications. QVZ can indicate a missing acknowledgement from an addressed module. That LED alone is insufficient grounds for condemning the CPU.

6ES5 948-3UA21 is the 1664 Kbyte option in the same ordering table. 6ES5 948-3UA12 is a different order version requiring revision and application checks. 6ES5 948-3UR22 belongs to the CPU 948R family for S5-155H. UA11, UA21 and UR22 must not be treated as the same part.

Editor’s note

When buying used Siemens equipment, obtain photographs of the complete part number, revision and fitted submodules. The name “CPU 948” alone is insufficient to select the correct spare.

Before removing a working CPU, back up the program, data blocks and communications settings. Identify the Flash-card contents before carrying out an overall reset.

If the CPU remains in STOP, examine the supply, backup battery, rack connections and diagnostic records first. A poor connection or non-responding I/O module can lead to an unnecessary CPU replacement.

For a failed PG connection, check the cable and TTY interface. Do not force or trial an unrelated cable because its connector looks similar. Inspect the rear connector for bent contacts, oxidation and damaged retainers.

A RUN indication is only part of the acceptance test. Check communications, installed IP-module functions and startup after a controlled power cycle under suitable test conditions, and preserve the results.

OtomasyonAVM resources and PDFs

Browse the 6ES5 948-3UA11 model page, SIMATIC S5 CPU family and used Siemens equipment. General documents are collected in the shared Siemens S5 PDF archive. CPU 948 technical sections and the exact-code ordering table are linked below.

Related topics

+ 6ES5 948-3UA12 — another CPU 948 order version.

+ 6ES5 948-3UA21 — 1664 Kbytes of internal RAM.

+ 6ES5 948-3UR22 — CPU 948R for the separate S5-155H system family.

+ 6ES5 374-2KH21 — 256 Kbyte Flash EPROM card.

+ 6ES5 752-0AA53 — PG submodule for the second interface.

Browse SIMATIC S5

S5 CPUs · S5 racks · S5 memory cards · S5 interfaces · Siemens S5 PLC · Used Siemens equipment

Siemens and external references

Siemens Industry Mall — 6ES5948-3UA11 — Exact order number: CPU 948 for S5-155U, 640 Kbytes.

Siemens ST 50 — SIMATIC S5 Catalog, 1998 — Printed pp. 4/27–4/29 / PDF pp. 205–207: CPU 948, memory and interface options; exact UA11/UA21 codes and minimum FB versions for IP modules.

Siemens S5-135U/155U System Manual — C79000-G8576-C199-07 — Section 5.2 / PDF pp. 157–169: CPU 948 hardware, overall reset, indicators and specifications. PDF pp. 168–169: 5 V supply, timers/counters, PG speed, dimensions and weight.