6ES5 581-0EB11

Siemens 6ES5 581-0EB11 – CP 581/486 Basic Module, 33 MHz and 4 MB RAM

Siemens 6ES5 581-0EB11 is a CP 581/486 basic board with an Intel 80486SL processor at 33 MHz and 4 MB DRAM working memory. The Siemens ordering table identifies it as the version without an onboard silicon disk. It adds computer-based processing to a Siemens S5 PLC system. Among S5 communication and processor modules, select the basic board and storage components separately.

Within the Siemens S5 architecture, the S5 CPU executes control tasks while the CP 581 can handle data acquisition, processing, storage and DOS applications. 0EB11 is a CP basic board; a complete machine application or ready-to-boot installation must not be assumed to accompany the board.

Processor, RAM and onboard storage

The CP 581/486 hardware table specifies an 80486SL processor at 33 MHz and an 82360SL system/ISA controller. 4 MB working memory provides program workspace. S5 memory cards and hard disk storage modules serve separate file storage requirements.

The same ordering table distinguishes 6ES5 581-1EB11 as the version with an onboard silicon disk. 6ES5 581-1EB12 and 6ES5 581-1EC12 are different complete order numbers. Their flash or operating system descriptions must not be transferred automatically to the 0EB11 board without a silicon disk.

Boot media and storage options

For this version, evaluate boot and application storage against the installed memory card or storage arrangement. Hard disk modules such as 6ES5 581-1LA11 are separate components; 6ES5 581-3LA11 is another storage order number. A basic board's code does not establish the contents of a complete assembly offered for sale.

The CP 581 family operates with MS-DOS and CP system software. Do not assume that a particular DOS version or language is supplied with 0EB11. Record existing startup files, drivers, CP communication software and the machine application. A PLC programming project backup and a CP file backup may cover different parts of the installation.

Front connections and expansion arrangement

The basic board provides two separate 26-way high-density connections for COM 1/COM 3 and KEYB/COM 2, plus three coaxial RGB sockets for the display. When selecting S5 cables and connectors or S5 interface equipment, check the required Y adapter, monitor connection and signal arrangement.

A 128-way internal ISA connection serves the storage module, with a separate connection arrangement for memory expansion. The 6ES5 581-0RA12 AT-slot module is the expansion component listed for CP 581/486. 6ES5 581-0RA11 has a different complete order number and must not be treated as the same item. When selecting S5 additional equipment, also record the installed AT card and its driver.

Power supply and mechanical data

Specified supplies are +5 V DC, ±5% and +24 V DC, +25%/−15%. Consumption for the CP 581/486 basic board is 1.9 A maximum on +5 V and 0.1 A maximum on +24 V. Add expansion module loads separately when calculating the complete system's power requirements.

The basic board uses a 160 × 233.4 mm double Eurocard format, with a 20 mm front panel and an approximate weight of 0.5 kg. Storage and AT-slot modules increase the complete assembly's width and weight.

S5 data exchange, indicators and configuration

The S5 interface uses dual-port RAM and the associated system software to exchange data with the CPU. Check address allocation, drivers and data block arrangements against the existing application; there is no universal DI/DO channel address for this board. The RUN indicator relates to S5 interface operation and CPU synchronization.

According to the manual, a flashing STOP indicator with the switch set to RUN can indicate that no CPU is synchronized. This does not establish a failed processor board by itself. Check the switch, driver loading and CPU-side configuration together.

6ES5 581-0EA11 and 6ES5 581-1EA11 are other CP 581 basic boards. Before changing to a different version such as 6ES5 581-0ED12 or 6ES5 581-0ED14, review processor, memory, software and peripheral requirements. The CP 581 family name alone does not establish direct interchangeability.

Editor's note

The absence of an onboard silicon disk is a defining feature of this model. Before trying to run a replacement board by itself, establish where the old installation boots from. Identify any memory card or storage module first to avoid mistaking a missing boot medium for board failure.

Preserve data before dismantling an installation that uses a RAM card. The Siemens manual warns that removing the RAM card or CP from the rack can cause the card's data to be lost. A medium carrying the machine's only copy needs a backup before routine handling.

If DOS starts but PLC data is missing, investigate synchronization first. During PLC troubleshooting, check driver loading, the relevant data blocks and RUN/STOP indicators together. A working display does not establish that every machine connection is functional.

Do not connect the RGB outputs to a modern display using an arbitrary cable. The installation requires a suitable adapter and supported display arrangement. Check the cable, accepted video mode and hardware settings before replacing the board for a missing picture.

Include the power supply in your checks. A board that works alone in an old rack may become unstable after adding storage and expansion hardware. Check supply rails, connector contact and total load rather than changing jumpers to address a power problem.

For used Siemens equipment, document the complete order number, detected RAM, boot medium, PLC communication test and supplied accessories. A working basic board and a complete assembly ready for installation are different delivery scopes.

OtomasyonAVM resources and PDFs

Start with About Siemens S5 PLC, S5 additional equipment, S5 memory cards and S5 cables.

The CP 581 hardware manual's ordering information explicitly distinguishes 0EB11 from the silicon-disk-equipped 1EB11. The manufacturer manual below also provides processor, connection and power supply information.

Related topics

+ 6ES5 581-1EB11: CP 581/486 basic board with an onboard silicon disk.

+ 6ES5 581-1LA11: mass storage module with a 120 MB hard disk.

+ 6ES5 581-0RA12: CP 581/486 AT-slot module.

+ 6ES5 581-1EA11: CP 581 basic board with a different processor arrangement.

Browse related equipment

Siemens S5 PLC · S5 CPU family · S5 additional equipment · Communication modules · Memory cards · Used Siemens equipment

Siemens and external references

+ Siemens CP 581 Manual, Volume 1 – Hardware, 6ES5 998-2AT21: third-party archive copy of the manufacturer's manual. PDF page 247 / printed page 6-3 identifies the exact order number, 4 MB RAM and absence of an onboard silicon disk. PDF page 220 / printed page 4-6 specifies the 80486SL at 33 MHz. PDF page 217 / printed page 4-3 covers power and mechanical data. Section 3.1.2 explains RUN/STOP and diagnostic indicators.