6ES5 951-7LD21

Siemens 6ES5 951-7LD21 PS 951 Power Supply for S5-115U/H

The Siemens 6ES5 951-7LD21 is a galvanically isolated PS 951 control power supply for S5-115U and S5-115H central racks in the SIMATIC S5 range. A front-panel selector sets the input to 120 V AC or 230 V AC. The main rack output is 5 V DC at 7 A without a fan or 15 A with a suitable rack fan assembly.

The PS 951 powers the CPU, the programmer interface and the internal control circuits of the S5 digital input and S5 digital output modules. If the CPU is running but sensors or actuators have lost power, use the machine schematic to check the external load supply and the relevant field fuses separately.

The two mains selector settings

+ 120 V setting · Permissible input 94–132 V AC. Rated input current 1.4 A at 120 V.

+ 230 V setting · Permissible input 187–264 V AC. Rated input current 0.8 A at 230 V.

Both settings permit a line frequency of 47–63 Hz. The front-panel drawing identifies L1, N and PE. With the mains supply isolated, check the selector position and S5 wiring against the machine schematic and the Siemens wiring diagram.

The 5 V, 5.2 V and 24 V outputs

+ 5 V DC main rack output · ±1.5% tolerance. 7 A without a fan or 15 A with a suitable rack fan.

+ 5.2 V DC PG/OP output · Supplies the programmer and operator panel interface. Up to 2.5 A, ±1.5% tolerance.

+ 24 V DC auxiliary output · Up to 0.35 A, ±5% tolerance.

When does the rack need a fan?

A fan assembly is required when the 5 V rack load exceeds 7 A or when any installed module requires forced cooling under the Siemens manual. Start with the S5 mounting rack part number. The 6ES5 700-3LA12 CR 700-3 is an example of a long central rack.

For long racks, the 6ES5 981-0HA11 fan assembly takes an AC supply, while the 6ES5 981-0HA21 takes 24 V DC. Check the fan supply against its own nameplate and the cabinet schematic.

To calculate the rack load, look up the 5 V current draw for the exact CPU 942, CPU 944 or CPU 945 fitted. Add the 5 V current draw of the I/O and communications modules in the rack.

How to distinguish it from similar PS 951 units

The 6ES5 951-7LB21 also takes 120/230 V AC and has a 3 A main output. The 6ES5 951-7ND51 and 6ES5 951-7ND41 are in the same 7/15 A output class and take 24 V DC. Match the full order number, input type and cooling arrangement when selecting a replacement.

Editor’s note

Record the nameplate and selector before replacement. Several versions carry the PS 7A/15A marking. Take photos of the 7LD21 suffix, the mains selector position and the rack part number.

Check the fan and airflow path together. If the installation relies on the 15 A rating, inspect the fan assembly, filter and air inlet. The 6ES5 981-0GA11 mounting kit for long racks has a separate part number from the fan assembly.

Record each voltage indicator when the fault occurs. Check the 5 V, 5.2 V and 24 V indicators separately. If the PLC is running but the programmer or panel fails to start, trace the PG/OP supply and its interface connection.

Back up RAM before removing the unit. The Siemens manual describes the two-battery arrangement. The ordering datasheet lists the spare unit without backup batteries. Check BATT LOW, the fitted S5 memory card and any external backup connection. Save the STEP 5 project and machine-specific data.

Ask for a test under load. When assessing a used Siemens S5 supply, ask for a nameplate photo, the AC selector setting used during the test, the load applied to the 5 V output and whether a fan was fitted.

OtomasyonAVM resources and PDFs

Compare other PS 951 versions under S5 power supplies. For an overview of racks, CPUs and modules, see About Siemens S5 PLCs.

+ OtomasyonAVM S5-115 manuals and PDF archive

+ SIMATIC S5-115H system manual (English PDF) · The 7LD21 specifications appear on printed page 17-8.

Related topics

+ 6ES5 951-7LB21 AC-input 3 A power supply and 6ES5 951-7ND51 DC-input 7/15 A power supply

+ 6ES5 981-0HA11 AC rack fan and 6ES5 700-3LA12 CR 700-3 central rack

Browse the S5 range

Used Siemens S5 · SIMATIC S5 · S5 power supplies

Selling this power supply? Send a nameplate photo, quantity, working or fault condition and asking price to otomasyonavm@gmail.com.

External references

+ Siemens SIMATIC S5-115U system manual, 6ES5 998-0UF23 (English PDF) · Specifications on page 15-10, fan installation in section 3.2.2 and AC wiring in section 3.3.1.

+ Siemens 6ES5 951-7LD21 ordering datasheet (English PDF) · Lists S5-115U/H coverage and specifies supply without backup batteries.