6ES5 581-4LA11

Siemens 6ES5 581-4LA11 – CP 581, 1.4 GB Mass Storage Module

Siemens 6ES5 581-4LA11 is a CP 581 mass storage module for SIMATIC S5. Siemens specifies a 1.4 GB, 2.5-inch IDE hard disk, listed as 1440 MB in the technical table, plus a 3.5-inch, 1.44 MB floppy drive. The CP 581 system context covers S5-115U, S5-135U and S5-155U.

When reviewing S5 communication hardware, distinguish the storage module from the 6ES5 581-0ED13 and 6ES5 581-0ED14 basic boards and the 6ES5 581-0RA12 AT slot module. Siemens lists 6ES5 581-3LA11 as the 540 MB version. Keep processor and RAM specifications separate from disk capacity.

Disk capacity, software and backups

For used equipment, check the installed drive label and the capacity reported by the system alongside the module number. A previous owner may have replaced the drive; the external label does not establish that the original disk remains fitted. Record partitions, startup files and the plant application archive separately.

Back up CP disk contents separately from the PLC application on S5 memory modules. Having the S5 CPU program does not establish that the CP operating system and application files have also been preserved. Replacing a failed disk and restoring the machine’s previous software environment are separate tasks.

When comparing 6ES5 581-0LA11, 6ES5 581-1LA11, 6ES5 581-5LA11 and 6ES5 581-6LA11, use the complete order number. Do not treat different versions as direct replacements until their suitability for the existing basic board and software arrangement has been established.

Connections, power and installation

Connections are 25-pin LPT and 26-pin high-density COM4; front width is approximately 20 mm. Supplies are +5 V ±5% and +24 V +25%/−15%. The assembly kit reference is C79458-L965-D11.

Select S5 cables and connectors and interface hardware against the peripheral’s connection documentation rather than socket appearance alone. In particular, do not assume that an ordinary serial cable is suitable for COM4.

Check spacers, screws and board connections when receiving S5 accessories and expansion modules. Confirm the arrangement in the S5 rack against the existing CP assembly. For S5 power supply checks, record the installed supply model and measured results. Disconnect power and use ESD precautions before removal or assembly.

Commissioning and acceptance checks

For an industrial communication application, test disk access separately from CPU data exchange. Confirm that existing files can be read, then verify the plant application’s expected data flow. A startup screen does not demonstrate every application function.

Record the CP basic board, storage module, software and target CPU together in the maintenance report. Use About Siemens S5 PLC for background, then make installation decisions against the documentation for the actual hardware. The offer should state which storage module, basic board, software and accessories are included.

Editor’s Note

When buying this module as used Siemens equipment, match the label to the actual hardware. Ask for the complete module number, drive label and photographs of both board faces. Establish which drive and basic board were used for the demonstration.

If the disk holds the machine’s last working copy, arrange a sector image using suitable equipment before repair attempts. Avoid repeatedly power cycling a drive that reports read errors. Preserve the original data before considering formatting or file system repair.

Go beyond watching startup during acceptance. Record cold startup, file read errors and application loading separately. If write testing is required, use a backup or test environment while protecting the original production archive.

Test the floppy drive separately, using sound, expendable media rather than the only copy of an important archive. Record the condition of the mechanism, eject button and reading operation.

Request packaging that supports the board, protects its connectors and reduces shock. At the workshop, do not force boards together with missing spacers. Keep photographs, backups and test results in one maintenance record so the next repair starts with clear evidence.

OtomasyonAVM resources and PDFs

+ Shared SIMATIC S5 PDF archive – S5-115 PDF files. The CP 581 manufacturer manuals used to verify this model are linked below.

Related topics

+ 6ES5 581-3LA11 · 6ES5 581-0ED13 · 6ES5 581-0ED14 · 6ES5 581-0RA12

Browse SIMATIC S5

+ S5 expansion modules · S5 communication modules · Siemens SIMATIC S5 · Used Siemens equipment

Siemens and external references

+ Siemens CP 581 User Manual – English, 6ES5 998-2AT22, C79000-G8576-C781-02. Relevant sections: preface; 2.7.2 assembly; 3.2 storage module; 4.2 technical data; 6.1 S5 systems.

+ Siemens CP 581 Benutzerhandbuch – German, 6ES5 998-2AT12, C79000-G8500-C781-02.