6ES5 581-5LA11
Siemens 6ES5 581-5LA11 CP 581 Mass Storage Module
The Siemens 6ES5 581-5LA11 is a CP 581 mass storage module used in SIMATIC S5 installations. Commercial catalogues list 6ES5 581-5LA11 as the version with a 6.4 GB hard disk. It stores the CP 581 operating environment, application files and records; its disk capacity must be distinguished from the PLC CPU's working memory.
A spinning disk is only the starting point of an assessment. Boot files, application projects and recorded data must also remain readable. A CP 581 application working alongside S5 communications modules may require software recovery if its disk contents are lost. This board serves a different purpose from the S5 memory cards fitted to a CPU.
Technical identity and basic-board pairing
Siemens' CP 581/LS-B Product Information, dated 7 March 2000, lists 6ES5 581-5LA11 together with the 6ES5 581-0EE15 Pentium CPU board in the supplied configuration. Declaration Khe001-04/2002 also identifies the exact code as CP 581 Massenspeicher. These retrieved manufacturer documents do not explicitly state capacity, so 6.4 GB is reported as a commercial catalogue description; verify the actual installed disk through its label and system information.
Storage, RAM and slot expansion perform separate jobs. The 6ES5 581-0HA11 memory expansion and 6ES5 581-0RA11 slot module should not be treated as substitutes for this board. Increasing hard disk capacity does not increase processor RAM or PLC program memory.
For basic boards such as 6ES5 581-0ED13 and 6ES5 581-0ED14, check connections, BIOS support and software versions together. The same applies when assessing an installation containing 6ES5 581-1EB12 or 6ES5 581-1EC12. A shared CP 581 designation is insufficient to approve a replacement; the documented 0EE15 pairing does not establish compatibility with every earlier basic board.
Installation checks: record the position in the S5 rack and the condition of cables and connectors before removal. The CP 581 family manual describes the storage board as a separate component, but its 1999 edition covers storage versions 3LA11 and 4LA11. Its pin assignments, current ratings, switch settings and dimensions are not presented here as verified 5LA11 specifications.
Related storage modules
6ES5 581-1LA11 and 6ES5 581-3LA11 are other order codes in the storage family. Compare the complete part number, disk arrangement and boot requirements of the existing installation when selecting a spare.
6ES5 581-4LA11 and 6ES5 581-6LA11 are further storage variants to investigate. Belonging to the same group does not establish a direct replacement relationship; suitability must be confirmed for the target CP 581 configuration.
Partitions and backups
Physical disk capacity may differ from the capacity shown for C:. Include logical partitions when assessing storage capacity and performance. The MS-DOS installation example in the cited Siemens CP 581/LS-B document uses DOS drives of no more than 2 GB each. A smaller C: drive does not, by itself, indicate a fault; this example is not a universal limit for every operating system.
Reduce the risk of data loss by preserving a full image of a readable disk, its partition layout and boot settings before making changes. Copying only the project directory may leave an incomplete recovery set. Record the operating system, drivers, application installation and any licence hardware as well. Do not assume that software and licences are included with a used board.
Editor's Note
Take your time with an old disk that still boots. Record the startup screen and settings, then create a disk image using suitable equipment before attempting repairs. Recovering a missing machine project can be much harder than finding another board.
A spinning disk and an activity light do not complete the test. Note read stalls, repeated unusual noises and slow startup. For storage reliability, go beyond observing a successful boot and arrange a read assessment that protects the original data.
If the CP 581 will not start, check the S5 power supply, board connections and BIOS boot selection before blaming the disk. Disconnect power before removing or refitting components, and photograph jumper positions before considering any changes.
Do not delete partitions simply because C: looks small; other partitions may contain archives or application files. Keep the distinctions in the memory and storage guide in mind: RAM, physical disk capacity and free space are different measurements.
For a used unit, request photographs of the full order code, revision and actual disk. Ask for startup and file-reading checks with the relevant basic board, and a record of the software and backups supplied. A healthy board may still contain none of the project needed by your machine.
OtomasyonAVM resources and PDF documentation
Continue with the Siemens S5 PDF archive and About Siemens S5 PLC. Check that the selected document covers the CP 581 version and order code being assessed.
Related topics
Siemens S5 PLC models · S5 expansion modules · S5 memory cards · S5 communications modules
Navigation: Used Siemens equipment | SIMATIC S5 main page | 6ES5 581-5LA11 model page | S5 PDF files
Siemens documents and external references
Siemens CP 581/LS-B Product Information, 7 March 2000: page 4 for the exact code and 0EE15 pairing; page 5 for the MS-DOS partitioning example.
Siemens CP 581 User Manual, 6ES5 998-2AT22: family construction and scope. Archived Siemens declaration Khe001-04/2002: page 5 for product identity.
ADEGIS commercial record for 6ES5581-5LA11: source of the 6.4 GB catalogue description; this is not a Siemens technical data sheet.