6ES5 581-1EB12
Siemens 6ES5 581-1EB12 – CP 581/486 Basic Module, 4 MB RAM and Onboard Silicon Disk
Siemens 6ES5 581-1EB12 is a CP 581/486 basic module for SIMATIC S5-135U and S5-155U/H. Its ordering description specifies 4 MB working memory, an onboard silicon disk and German MS-DOS 6.2. It provides additional computer-based functions within a Siemens S5 PLC system. Among S5 communication modules, distinguish the basic board from storage and expansion components.
Siemens declaration Khe001-04/2002 lists the complete order number as “CP 581 GBG 486 B0-Step m.Flash”. This identifies the 486-based B0-Step version with flash in a manufacturer document. In the Siemens S5 architecture, assess this board's role alongside the machine's S5 CPU.
Division of tasks between the PLC CPU and CP 581
The CP 581 family uses an AT-compatible computer arrangement installed in the PLC rack. The S5 CPU executes control tasks, while the CP can handle data acquisition, storage, processing and application software. Distinguishing PLC operation from the DOS application's role helps identify which side requires attention during commissioning or maintenance.
Booting into DOS alone does not establish that all communication with the PLC works. Check PLC programming data blocks, CP system software and the machine application together. The S5-155U/H designation alone does not establish automatic redundant operation of the application; assess the actual system configuration.
4 MB RAM, silicon disk and application backups
The 4 MB working memory and onboard silicon disk are different memory areas. RAM provides working space for running programs; the silicon disk stores files. S5 memory cards and external storage components are separate items. An onboard silicon disk does not establish that the complete machine application and configuration have been backed up.
German MS-DOS 6.2 belongs to the product's ordering description. Inspect the actual operating system, startup files, drivers and application content on a used board. BIOS/SETUP records, file backups and any external disk backup cover different parts of the installation.
Differences from similar basic boards
The Siemens declaration lists 1EB12 as B0-Step and 6ES5 581-1EC12 as B1-Step. The 1EB12 product description identifies S5-135U and S5-155U/H. Do not transfer the 1EC12 system scope automatically to 1EB12, particularly when selecting equipment for S5-115U based only on the CP 581/486 family name.
6ES5 581-1EB11 and 6ES5 581-0EB11 are different complete order numbers. 6ES5 581-1EA11 and 6ES5 581-0EA11 are other CP 581 basic boards. Processor speeds and hardware specifications listed for 6ES5 581-0ED12 or 6ES5 581-0ED14 must not be assigned to 1EB12.
Storage and AT expansion components
Hard disk storage modules such as 6ES5 581-1LA11 and other disk versions such as 6ES5 581-3LA11 are separate components from this basic module. The onboard silicon disk and a mechanical hard disk are different hardware. Establish which medium boots the existing installation before replacing components.
The 6ES5 581-0RA11 and 6ES5 581-0RA12 AT-slot modules are separate order items. When choosing S5 additional equipment, assess the basic board version, installed expansion card, mounting arrangement and software requirements together. Membership of the same family does not establish unconditional interchangeability.
Connections and configuration checks
The CP 581 family manual describes S5 backplane communication, serial connections, keyboard/mouse connections and display arrangements. When selecting S5 cables and connectors or S5 interface equipment, verify the 1EB12 hardware version, existing wiring diagram and adapter arrangement together.
The family manual describes CPLINK for access to the silicon disk or memory card from a PG/PC in an appropriate configuration. Check recovery software and connections against the installed board. Do not apply another CP 581 revision's jumper positions, addresses or disk preparation commands without verification.
Editor's note
Preserve the existing installation before replacing this board. A small machine-specific file on the silicon disk may be essential to restoring operation. Record files, startup configuration and SETUP information from a working board, and retain the original until its replacement has been validated.
“DOS boots” is not a complete functional test. Check RAM, application startup and PLC data exchange separately. During PLC troubleshooting, a CPU-side data block or synchronization problem can resemble a faulty CP board.
Photograph the complete 1EB12 order number and hardware version clearly. A listing that says only CP 581/486 is insufficient. Record any added memory or storage hardware separately rather than ordering from appearance alone.
Backing up and formatting are different operations. A command that prepares the silicon disk may erase the working application. Verify source and destination before attempting recovery, and treat writing to a unique original as a last resort.
A missing display does not automatically identify a faulty basic board. Check the monitor, cable and adapter against the installed hardware arrangement. A connector fitting physically does not establish the correct electrical connection, and arbitrary adapters can complicate diagnosis.
For used Siemens equipment, document the boot test, detected RAM, silicon disk readability, software content and communication results with a suitable test CPU. A working machine backup and an empty spare board are different deliverables; agree on the supplied content before purchase.
OtomasyonAVM resources and PDFs
Start with About Siemens S5 PLC, S5 additional equipment, S5 communication modules and S5 memory cards.
The CP 581 family manual explains the general system and maintenance arrangement. The Siemens declaration below identifies the complete 1EB12 order number; specifications for other order numbers in an older manual must not be transferred automatically to this model.
Related topics
+ 6ES5 581-1EC12: another basic module, identified as B1-Step in the manufacturer declaration.
+ 6ES5 581-1EB11: CP 581/486 basic board with a different suffix.
+ 6ES5 581-1LA11: mass storage module with a 120 MB hard disk.
+ 6ES5 581-0RA12: AT-slot module for the CP 581 family.
Browse related equipment
Siemens S5 PLC · S5 CPU family · S5 additional equipment · Memory cards · Cables · Used Siemens equipment
Siemens and external references
+ Siemens EC Declaration of Conformity, Khe001-04/2002: third-party copy of the manufacturer document dated 26 April 2002. Page 5 lists the complete 6ES5581-1EB12 number as “486 B0-Step m.Flash” and distinguishes 1EC12 as B1-Step.
+ Siemens CP 581 Manual, Volume 1 – Hardware, 6ES5 998-2AT21: archive copy of the manufacturer's family manual, sections 1.1, 2.10 and 2.11. This older edition is not a complete technical datasheet for 1EB12.