6ES7 193-4CA20-0AA0
Siemens 6ES7193-4CA20-0AA0 ET200S TM-E15S24-A1 Screw Terminal Module
Siemens 6ES7193-4CA20-0AA0 is the TM-E15S24-A1 screw terminal base used with 15 mm wide electronic modules in ET200S stations. It has eight connection points in a 2 × 4 arrangement. The AUX1 bus continues through the base and can be accessed through A4 and A8. The code also appears in documentation as 6ES7 193-4CA20-0AA0.
Screw connections and station function
Field conductors connect to screw terminals on this model. The terminal base provides the mechanical and electrical connection for the electronic module fitted to it. The backplane bus and the power buses from the power module also continue through the base. The electronic module determines the signal function within the PLC station.
When replacing an existing base, check the screw connection type, terminal markings and electronic module's full order number together. Follow the relevant Siemens installation instructions for conductor preparation and terminal tightening. A photograph of the base and connected wiring provides a record of the arrangement before removal.
Terminal arrangement and AUX1 access
Terminals 1, 2, 3, 5, 6 and 7 connect to the electronic module. Their functions follow that module's wiring diagram. A4 and A8 connect to the same AUX1 bus. The eight physical connection points therefore comprise six electronic module connections and two AUX1 connections.
Identify the potential distributed through AUX1 from the project wiring diagram. Since A4 and A8 share a common bus, different, independent potentials must not be applied to these two terminals. When reviewing the power supply distribution, trace the AUX1 path separately from the electronic module's signal connections.
Comparison with 4CA30 and 4CB20
6ES7193-4CA30-0AA0 is the TM-E15C24-A1 spring terminal base. It has the same terminal arrangement with AUX1 access through A4/A8. The 4CA20 uses screw connections. When changing the connection technology, assess conductor preparation and securing methods against the instructions for the selected base.
6ES7193-4CB20-0AA0 also uses screw terminals, but it is the TM-E15S24-01 type. On that version, terminals 1–8 connect to the electronic module, with no terminal access to the AUX1 bus. Matching dimensions do not change these terminal functions. If wiring requires the electronic module's terminals 4 and 8, A4 and A8 on the 4CA20 cannot serve that purpose.
Module compatibility and channel count
Eight terminals do not mean eight input or output channels. The Siemens manual for the 6ES7134-4LB02-0AB0 2AI U HF lists 6ES7193-4CA20-0AA0 among the bases usable with that two-input voltage module. In this example, the electronic module determines the channel count and performs the measurement.
Check the analog signal range and field connections in the electronic module's documentation. For a different module, use its compatibility table, terminal assignments and required potentials. A shared housing width alone is insufficient for selecting the correct base.
Dimensions, weight and packing information
One terminal module measures 15 × 132 × 43 mm, width × height × depth, and weighs approximately 65 g. Siemens specifies a standard packing unit of five terminal modules for this order number. State whether the requested quantity refers to individual modules or complete packs when asking for a quotation.
Editor's note
Check the TM-E15S24-A1 designation, screw terminals and A4/A8 connections together. A label photograph and the electronic module's full order number help distinguish similar bases. Use the Siemens ET200 manuals section for wiring diagrams and module combinations. Stock, product condition and the quantity to be supplied should be confirmed when requesting a quotation.
Related topics
For control and monitoring, explore PLC and HMI systems, operator panels and SCADA. For system research, see Siemens S7-300, about Siemens ET 200 and ET 200 PROFIBUS and PROFINET.
Other module groups: ET 200 analog input modules · Digital input modules · Digital output modules · Connection modules · Additional modules.
Navigation: Siemens ET 200 · Siemens SIMATIC S7 · Siemens S7 PLC · OtomasyonAVM home