6ES7 194-4CA00-0AA0
Siemens main menu › SIMATIC S7 family › ET 200 › ET 200 manuals
6ES7 194-4CA00-0AA0 — Siemens ET 200pro CM IO 4 × M12 Connection Module
6ES7 194-4CA00-0AA0 is the ET 200pro CM IO 4 x M12 connection module in the Siemens SIMATIC product family. It provides field connections for compatible digital and analog electronic modules. Within the ET 200 system architecture, the connection module and electronic module are separate components; the electronic module determines the input or output function.
Five checks for selection and connection
1. Electronic module compatibility: Examples include the 8DI 6ES7141-4BF00-0AA0 among ET 200 digital input modules and the 4DO 6ES7142-4BD00-0AA0 among ET 200 digital output modules. The 4AI U 6ES7144-4FF00-0AB0 is an example from the ET 200 analog input range. These are compatibility examples; the ET 200pro family name alone does not establish that every electronic module uses the same connection component.
2. Four sockets and channel count: The front has four five-pin M12 female sockets designated X1–X4. Pin assignments depend on the electronic module. With the 8DI module listed above, X1–X4 carry DI0–DI3 on pin 4 and DI4–DI7 on pin 2, respectively; pin 1 is sensor supply, pin 3 supply return and pin 5 functional earth. Record socket numbers separately from channel addresses in the Siemens S7 hardware plan.
3. Cable and connector selection: When comparing ET 200 connection modules, check the cable conductor arrangement as well as the socket count. The 8DI arrangement using two inputs per socket requires a conductor for pin 2. Select Y-connectors or assembled cables from the channel wiring diagram and include the full order numbers for ET 200 connection accessories in the parts list. Do not apply the 8DI pin assignment to an analog application.
4. Supply and load limits: Plan the ET 200 power supply arrangement around the connected electronic module. When sizing ET 200 power distribution, check sensor consumption or actuator load against that module’s technical data. Do not infer channel current, measurement range or diagnostic functions solely from this connection module’s order number.
5. Dimensions and installation: Dimensions are 45 × 130 × 39 mm (width × height × depth); weight is approximately 300 g. Allow additional clearance for cable exits. Check seals, fixing screws and connector seating during installation. Close unused M12 sockets with suitable caps and follow the manufacturer’s assembly instructions to meet the IP65/IP66/IP67 protection requirements.
Editor’s note
4 × M12 does not mean four channels. Check socket count, channel count and pin assignments separately. Also, 6ES7194-4CA10-0AA0 is the plastic version listed for digital modules; it should not automatically replace 4CA00 in an analog application. Record both the connection module and the electronic module order numbers in maintenance records.
PDF and technical documentation
Visit the Siemens ET 200 PDF and user manual library for the documentation guide. In the ET 200pro manual, 09/2015, A5E00335544-AJ, printed pages 264–265 describe this connection module, page 127 covers installation, and page 334 gives the pin assignment for the specified 8DI module. Dimensions are also stated in the Siemens product datasheet.
Related topics
Terminal bases • Connection modules • Communication interfaces • Other network interfaces • Power distribution • Additional modules
Otomasyon AVM • Siemens guide
Siemens main menu | SIMATIC S7 family | ET 200 module categories | ET 200 PDF archive