6ES7 193-7DB10-0AA0
Siemens main menu › Siemens S7 PLC › ET 200 family › Terminal blocks
6ES7 193-7DB10-0AA0 — ET 200iSP TM-PS-B Terminal Module
6ES7 193-7DB10-0AA0 is the TM-PS-B terminal module for a redundant PS DC24V power supply in the ET 200iSP series of the Siemens ET 200 distributed I/O family. Within the ET 200 terminal block range, it provides the mounting and wiring base for the power supply; it does not generate a supply voltage itself.
Function and construction
TM-PS-B is used with TM-PS-A when configuring redundant power. Check the order numbers of the ET 200 power supply modules separately from those of their bases. The station's power distribution components must also match the intended arrangement.
Connections: Screw terminals, with three terminals for supply voltage and equipotential bonding. The terminal module can be prewired. Its connection function should be distinguished from the electronic functions of the plug-in power supply.
When comparing ET 200 connection modules, appearance alone is insufficient. The ET 200 system architecture requires the subseries, terminal type and plug-in module to match; compatibility with ET 200S or ET 200SP bases must not be assumed.
Five checks before selection or replacement
1. Complete terminal number: Verify 6ES7193-7DB10-0AA0 on the label. TM-PS-A and TM-PS-B serve different positions in the power supply arrangement.
2. Power supply number: Siemens specifies the PS family from 6ES7138-7EA01-0AA0 onward for this base. Mechanical coding prevents insertion of the earlier 6ES7138-7EA00-0AA0. Do not alter the coding or force the module into place.
3. Supply type: The -7DB10 base is for PS DC24V. Do not treat it as equivalent to the -7DB20 base used with AC 120/230 V power supplies.
4. Redundancy requirements: Verify both power supplies, the terminal arrangement and the supported interface version. For redundant operation with the -7DA10/-7DB10 combination, the Siemens 03/2025 manual specifies PS DC24V product version 5 or later.
5. Physical condition: Inspect terminal screws, contacts, latches and coding elements on used parts. Compare photographs of both the terminal label and the installed PS module label before ordering.
Relationship to other station modules
TM-PS-B has no digital or analog signal channels. Field signals are handled by ET 200 digital input modules, analog input modules and digital output modules. Products in these broader categories require a separate ET 200iSP compatibility check.
Communication with the controller belongs to the PROFIBUS and PROFINET interface modules. When selecting ET 200 additional modules and accessories, do not attribute communication or CPU functions to the power supply terminal base.
Editor's note
“ET 200 power supply base” is not a precise enough description for ordering this part. Read the full terminal number, PS number and product version together. Overlooking the -7DB10/-7DB20 distinction can result in a similar-looking component that does not suit the existing supply arrangement.
PDF documentation and user manuals
Visit the Siemens ET 200 PDF and user manual page for documentation. The relevant manufacturer reference is ET 200iSP Operating Instructions, 03/2025, A5E00247483-AL, particularly Section 6.12, power supply redundancy, and Section 12.2, TM-PS-A / TM-PS-B terminal modules.
Related topics
Terminal bases • Power supply modules • Power distribution • Connection modules • Interfaces and communication • ET 200 system structure
Otomasyon AVM • Siemens guide
Siemens main menu | SIMATIC S7 family | ET 200 module categories | ET 200 PDF archive