6ES5 947-3UA21

Siemens 6ES5 947-3UA21 – CPU 947 Memory and Interface Module

Siemens 6ES5 947-3UA21 is the memory and interface section of the CPU 946/947 assembly in SIMATIC S5-155U systems. It contains 64 Kwords, equivalent to 128 KB of internal user RAM. Within the S5 CPU arrangement it works with 6ES5 946-3UA21 CPU 946; CPU 946 and CPU 947 cannot operate individually. Plan purchasing and testing around this paired construction.

Internal memory and supplied contents

Review the program and data backup together with the S5 memory hardware. Any installed 355 memory expansion unit and other S5 supplementary equipment are separate supplied items. The offer should distinguish the CPU 947 board, the complete CPU 946/947 assembly and any memory expansion set. Do not assume every pictured component is included.

Related order numbers

When replacing parts in a system containing 6ES5 946-3UA22 or 6ES5 947-3UA22, record the companion board number and both board revisions. Do not treat variants with a different suffix, such as 6ES5 947-3UR21, as the same item. 6ES5 948-3UA21 CPU 948 uses a different CPU construction; its RAM, Flash card and commissioning information must not be transferred to this board.

PG connection and interface checks

CPU 947 has a 15-pin front connector; the assembly’s serial PG connection operates at 9600 bit/s. Select the S5 connecting cable and interface equipment for the existing arrangement. When checking communications hardware, assess the cable, converter, PG settings and CPU assembly together. A failed connection alone does not establish that replacing CPU 947 will resolve the problem.

Supply and rack installation

The manual specifies a 5 V DC supply and approximately 2 A current for CPU 947. This is not the combined consumption of CPU 946/947. Include the other boards when assessing the S5 power supply. Within the S5 rack, CPU 947 occupies one slot and CPU 946 occupies two: three slots for the assembly. Check additional space for memory expansion separately.

In a multiprocessor arrangement, compare the 6ES5 923-3UC11 COR 923C coordinator and CPU placement with the chassis documentation. During Siemens S5 PLC maintenance, photograph board order, connections and jumpers before removal. Compare jumpers with the drawing for the exact 947-3UA21 number rather than copying another revision’s appearance.

Preserving the program and isolating faults

Back up the STEP 5 project and required data blocks before PLC programming or board replacement. During PLC debugging, record assembly indicators together with PG diagnostics. Establish how the program and application data will be preserved before clearing memory, removing the battery or replacing boards. One board’s appearance does not establish the operating condition of the complete assembly.

Editor’s Note

When buying used Siemens equipment, request the label of the CPU 946 that will be used with CPU 947. Establish whether the offer covers the 947 board alone or the two-module assembly. Plan the replacement as a matched system.

64 Kwords is not the same capacity as 64 KB. This board contains 128 KB of internal user RAM. If an offer states something different, compare its label, documentation and PG-reported configuration before deciding.

If the program is readable, back it up before removal. Machine settings and changing data blocks may be absent from an older project file. Identify the last working copy with its date and machine name.

If PG communication fails, first try a known working cable and converter, then check the assembly and supply. Do not condemn the board after testing it alone. Record the companion board and chassis used for the test.

Inspect backplane connectors, the RAM area and previous repair work closely. Observe read/write and application tests in a working assembly before accepting condition from appearance alone. Preserve jumper settings and photographs for the next technician.

OtomasyonAVM resources and PDFs

+ Shared SIMATIC S5 PDF archive – S5-115 PDF files. Use the S5-155U CPU 946/947 manufacturer manual below as the principal reference for this part.

Related topics

+ 6ES5 946-3UA21 · 6ES5 946-3UA22 · 6ES5 947-3UA22 · 6ES5 947-3UR21 · 6ES5 948-3UA21

Browse SIMATIC S5

+ S5 CPU models · S5 memory hardware · S5 racks and chassis · S5 cables and connectors · Siemens SIMATIC S5

Siemens and external references

+ Siemens S5-155U CPU 946/947 Manual – 6ES5 998-0UM22, Release 07. CPU 946/947 sections 1.2–1.5 cover construction, memory and electrical data; Figure 4-2 shows 947-3UA21 jumpers. The central controller section specifies operation of the two modules together.

+ Siemens S5-135U/155U System Manual. For comparing chassis, coordinator arrangements and different CPU generations.