FRENIC-HVAC
FRENIC-HVAC: variable speed for building fans and pumps
FRENIC-HVAC is Fuji Electric’s drive family for ventilation, air-conditioning and building-water motors that run at changing demand. When full flow is not always needed, speed control can in some applications replace part of the throttling done by a damper or valve. The AR1 series is one generation; its exact power and input class come from the complete order code.
Temperature difference and feedback
Fuji’s HVAC function description gives temperature-difference control of a cooling-water pump as an example. The drive compares sensor feedback with a target and changes speed. In that arrangement, define the sensor type, analog signal range and safe minimum pump speed before setting parameters. A drive cannot compensate for an unsuitable sensor or hydraulic design.
Connections and documents
HVAC and FRENIC-AQUA share an RS-485 user manual, but application and pump-protection settings must still be read for the actual series. For building-system integration, match protocol, address, baud rate and command source to the installed controller. Fuji VFD software covers setup tools, while drive documents groups manual titles.
Browse other drives through the Fuji VFD section and the older fan-and-pump FRENIC-Eco family. Similar duties do not establish identical terminals or parameters.