FRENIC-Eco

FRENIC-Eco: speed control for fans and pumps

FRENIC-Eco is Fuji Electric's AC drive family for fan and pump duties with changing demand. When a water system's pressure or an air system's flow requirement varies through the day, the drive can adjust motor speed instead of holding it at one fixed point. This focus does not make its wiring or parameters interchangeable with the general-purpose FRENIC-MEGA or machinery-oriented FRENIC-Ace.

How is an F1 unit selected?

Fuji's tables for the FRENIC-Eco F1 show a series-wide applied-motor range of 0.75–110 kW for the 200 V class and 0.75–560 kW for the 400 V class. These are not ratings for every individual drive. Read the complete FRN order code, supply-voltage class and motor nameplate current. The applicable drive output current and duty class matter more than matching a kW number alone.

What does it do on site?

F1's PID control can compare a pressure or flow target with sensor feedback and adjust motor speed. Automatic energy saving, 0–10 V and 4–20 mA analog options, digital inputs and RS-485 communications appear in Fuji's common specifications. Their terminal assignments depend on the installed parameter set. Preserve the wiring drawing and parameter backup before removing an older unit.

Fuji lists FRENIC-Eco F1 as discontinued. A suggested alternative family is not an electrically interchangeable replacement: compare motor current, control inputs, communication options and the existing load. The Fuji VFD section covers other drives; Fuji VFD software collects setup tools, and FRENIC and legacy-drive documents groups manual titles.


Refine Search