FRENIC-MEGA

FRENIC-MEGA: industrial motor speed and torque control

FRENIC-MEGA is a Fuji Electric AC drive family used to control industrial motor speed and torque. It appears in more than fan and pump duty, including conveyors and machinery with changing loads. The G1 generation and later G2 carry the same family name but have different order codes and duty tables. A range quoted for one generation must not be applied to every unit.

Reading the G1 rating

Fuji's 400 V heavy-duty table for G1 spans applied motors from 0.4 to 630 kW across many drive frames. That is a series range, not the capacity of one drive. The complete FRN code, supply class, rated output current and duty selection identify the actual unit. Motor cabling, braking components and control terminals also vary with its size and application.

Moving beyond G1

Fuji lists G1 as discontinued and identifies G2 as an alternative family. This is useful direction for a replacement search, not a guarantee that terminal assignments or parameter files are interchangeable. Record the motor plate, speed/torque duty, any encoder, braking hardware, option cards and field network before selecting another drive. FRENIC-VG is another control family; FRENIC-Ace addresses different machinery requirements.

Use the Fuji VFD section to compare families, Fuji VFD software for setup tools and FRENIC documents for manual families. For used or removed equipment, inspect the complete nameplate code and installed option cards before calling two units equivalent.


Refine Search