FRENIC-AQUA

FRENIC-AQUA: a drive family for water systems

FRENIC-AQUA is Fuji Electric’s VFD family for adjusting pump-motor speed to water-system demand. In a pressure, level or flow feedback loop, the drive can vary speed with process demand. The AQ1 series is a distinct generation; exact kW and current limits depend on the complete FRN code.

Functions for the pump

Fuji’s common specifications list pump-oriented functions including check-valve protection. These do not replace suitable pipework, valves or pump selection; they need the right commissioning settings. The same source gives an adjustable maximum-frequency range of 25–120 Hz. That setting range does not mean the installed pump is safe at 120 Hz. Motor and pump limits govern.

Match the drive to the controls

Check the pressure transmitter’s signal range, command inputs, alarm outputs and any building-system connection against the exact drive code and wiring diagram. Carrier-frequency limits also vary with frame capacity. A shared communications document with FRENIC-HVAC does not make their pump parameters identical. Find setup tools in Fuji VFD software and manual titles in drive documents.

Compare other motor drives in the Fuji VFD section. For replacement work, check supply, output current and pump-control method as well as nominal power.


Refine Search