6ES7 193-4CB10-0AA0

Siemens 6ES7193-4CB10-0AA0 ET200S TM-E15C23-01 Spring Terminal Module

Siemens 6ES7193-4CB10-0AA0 is the TM-E15C23-01 spring terminal base for 15 mm wide electronic modules in the ET200S system. It provides six connection points in a 2 × 3 arrangement. The order number also appears in documentation as 6ES7 193-4CB10-0AA0.

Terminal numbers and base function

This base has terminals 1, 2, 3, 5, 6 and 7; terminals 4 and 8 are absent. The electronic module fitted to the base determines the signal assignments. Check that every terminal number required by the wiring diagram is physically available on the selected base.

The terminal module provides the mechanical and electrical connection for the electronic module. The backplane bus and the power buses from the power module continue through the base. When selecting parts for a PLC station, assess the terminal base order number together with the order number of the electronic module it will carry.

AUX1 continuity and terminal access

The AUX1 bus continues through the TM-E15C23-01, but its potential cannot be accessed at this base's terminals. If field wiring needs the potential distributed through AUX1, identify the appropriate connection point from the station wiring diagram.

When checking the power supply distribution, trace the electronic module's signal terminals and the AUX1 path separately. For a replacement, compare the terminal markings, connected conductors and potential distribution shown in the project documentation. Similar housing dimensions alone do not establish that the wiring requirements are met.

Electronic module compatibility

The Siemens manual for the 6ES7134-4LB02-0AB0 2AI U HF lists 6ES7193-4CB10-0AA0 among the terminal bases usable with that voltage input module. This two-input example also shows why six terminals do not mean six I/O channels.

The analog signal type, measuring range and channel characteristics come from the electronic module's specifications. For a different module, use its Siemens compatibility table and wiring diagram. A shared 15 mm width does not establish that the same terminal arrangement will meet every module's requirements.

Differences from 4CB00 and 4CB30

6ES7193-4CB00-0AA0 is the TM-E15S23-01 version with screw terminals. Both models have a 2 × 3 terminal arrangement; the 4CB10 version uses spring terminals. Conductor preparation and installation must follow the instructions for the selected connection type.

6ES7193-4CB30-0AA0 is the TM-E15C24-01 spring terminal base with a 2 × 4 arrangement and a height of 132 mm. The 4CB10 is 120 mm high. Selection must account for both the housing dimensions and the terminals required by the electronic module. In particular, wiring that requires terminals 4 and 8 cannot be accommodated by the C23-01 base.

Dimensions, weight and packing quantity

One terminal module measures 15 × 120 × 43 mm, width × height × depth, and weighs approximately 55 g. Siemens specifies five terminal modules per standard packing unit for this order number. State clearly whether a quotation request refers to individual modules or complete packs.

Editor's note

Check the existing base's TM-E15C23-01 type marking together with the electronic module's full order number. A photograph showing the label and field wiring helps compare terminal arrangements. Use the Siemens ET200 manuals section to check terminal assignments and module combinations. Stock, product condition and the quantity to be supplied should be confirmed when requesting a quotation.

Related topics

For control and monitoring, explore PLC and HMI systems, operator panels and SCADA. For system research, see Siemens S7-300, about Siemens ET 200 and ET 200 PROFIBUS and PROFINET.

Other module groups: ET 200 analog input modules · Digital input modules · Digital output modules · Connection modules · Additional modules.

Navigation: Siemens ET 200 · Siemens SIMATIC S7 · Siemens S7 PLC · OtomasyonAVM home