6ES7 193-4CA30-0AA0

Siemens 6ES7193-4CA30-0AA0 ET200S TM-E15C24-A1 Spring Terminal Module

Siemens 6ES7193-4CA30-0AA0 is the TM-E15C24-A1 spring terminal base for 15 mm wide electronic modules in the ET200S system. It provides eight connection points in a 2 × 4 arrangement. The AUX1 bus continues through the base, with terminal access through A4 and A8. The order number also appears in documentation as 6ES7 193-4CA30-0AA0.

How the eight terminals are assigned

Terminals 1, 2, 3, 5, 6 and 7 connect to the electronic module. The fitted module determines their signal assignments. A4 and A8 connect to the same AUX1 bus. Of the eight connection points, six therefore connect to the electronic module and two provide access to the common AUX1 potential.

The 2 × 4 designation does not specify the I/O channel count. The electronic module determines the number of inputs or outputs and the signal type. Read the complete terminal markings when comparing bases; A4 and A8 do not have the same function as signal terminals numbered 4 and 8 on another base.

Station function and the AUX1 path

The terminal base provides the mechanical and electrical connection for the electronic module. The backplane bus and the power buses from the power module continue through it. When selecting a part for a PLC station, assess the electronic module's full order number together with the terminal base designation.

Use the station wiring diagram to identify the potential distributed through AUX1. A4 and A8 provide access to a common bus, so separate, unrelated potentials must not be connected to these two points. When checking the power supply wiring, trace the field device's signal terminals and common potential connections separately.

Differences from 4CA20 and 4CB30

6ES7193-4CA20-0AA0 is the TM-E15S24-A1 screw terminal base. It uses the same terminal arrangement with AUX1 access through A4 and A8. The 4CA30 version uses spring terminals. Conductor preparation and installation must follow the instructions for the selected connection type.

6ES7193-4CB30-0AA0 is the TM-E15C24-01 version. On that model, terminals 1–8 connect to the electronic module, and there is no terminal access to AUX1. The two bases have the same dimensions but different terminal functions. In particular, wiring that requires the electronic module's terminals 4 and 8 cannot be provided through A4 and A8.

Electronic module compatibility

The Siemens manual for the 6ES7134-4LB02-0AB0 2AI U HF explicitly lists 6ES7193-4CA30-0AA0 among the terminal bases usable with that two-input voltage module. In this combination, the electronic module performs the measurement and the base provides the field wiring connections.

Check the analog signal range, channel characteristics and required terminals in the electronic module's documentation. When changing to a different module, use its compatibility table and wiring diagram. A shared 15 mm width or similar housing alone is insufficient to select the correct terminal base.

Dimensions, weight and packing quantity

One terminal module measures 15 × 132 × 43 mm, width × height × depth, and weighs approximately 65 g. Siemens specifies a standard packing unit of five terminal modules for this order number. State clearly whether the requested quantity refers to individual modules or complete packs when asking for a quotation.

Editor's note

Check the TM-E15C24-A1 designation on the label together with the A4/A8 connections. The electronic module's full order number and a photograph showing the existing base and wiring help identify the required part. Use the Siemens ET200 manuals section for terminal diagrams and module combinations. Stock, product condition and the quantity to be supplied should be confirmed when requesting a quotation.

Related topics

For control and monitoring, explore PLC and HMI systems, operator panels and SCADA. For system research, see Siemens S7-300, about Siemens ET 200 and ET 200 PROFIBUS and PROFINET.

Other module groups: ET 200 analog input modules · Digital input modules · Digital output modules · Connection modules · Additional modules.

Navigation: Siemens ET 200 · Siemens SIMATIC S7 · Siemens S7 PLC · OtomasyonAVM home