6ES7 120-0BH01-0AA0

6ES7 120-0BH01-0AA0 – Siemens TB16SC Terminal Block

Series: SIMATIC SC / ET 200L-SC
Category: Smart Connect terminal base with spring terminals

Description and system role

6ES7 120-0BH01-0AA0 is the spring-terminal version of the TB16SC terminal block for Smart Connect electronic modules in the Siemens ET 200 family. It carries the field wiring and accommodates SC modules. The fitted electronic module determines the input, output or measurement function.

It provides expansion for an ET 200L-SC system and can also connect to TB16IM-SC to accommodate additional SC modules. Review the complete station in the PLC or SIMATIC S7 project. The PROFIBUS interface and this terminal base perform different tasks.

Slots and terminal design

Capacity: 8 SC slots, A–H. Wire connection: spring terminals. Screw-terminal counterpart: 6ES7 120-0AH01-0AA0. When choosing a terminal base, compare the complete order number, terminal type and existing station connection.

SC modules do not all occupy the same space. Some analog output modules, for example, occupy two slots. Check each module's slot requirement rather than calculating capacity from the number of modules alone.

Supply and current limits

Current-carrying capacity through 1L+/2L+: maximum 8 A. Per-slot limit with parallel supply: maximum 1.5 A. These are terminal-base limits; the electronic module's channel ratings also apply.

2L+/2M provide the continuation of the 1L+/1M supply and should not be treated as independent supply groups. Size the power supply, wiring and circuit protection for the sensors and output loads that will operate simultaneously.

Compatible electronic modules

Compatible examples include 6ES7 121-1BB00-0AA0 digital input, 6ES7 122-1BB00-0AA0 digital output, 6ES7 123-1FB00-0AB0 analog voltage input and 6ES7 124-1FA00-0AB0 analog voltage output. Check the selected module's channel count, signal type and supply requirements for the application.

The 6ES7 127-1BE00-0AB0 counter and high-speed analog SC modules may be used on TB16SC only when it is connected to TB16IM-SC. For special-function modules, physical fit alone does not establish system compatibility.

Supplementary terminals and wiring

Suitable supplementary terminals extend two-wire termination to three- or four-wire connections. Spring-terminal options include the single-tier 6ES7 120-1BH00-0AA0 and double-tier 6ES7 120-2BH00-0AA0. They add wiring points, not electronic I/O channels.

Arrange the connections according to the fitted electronic module's diagram. Do not use unassigned terminals as spare junction points. Provide the required local ground connection. With AC modules, do not connect different mains phases to the same terminal block. Verify that the relevant circuits are de-energized before wiring or removal.

Replacement and fault checks

Before replacement, record the module sequence, wire labels and SC connecting cable. Inspect the spring terminals, module contacts, housing and retaining parts. A loose connection or damaged base can cause problems even when the electronic module is serviceable.

An HMI or SCADA alarm does not establish that the base is faulty. Inspect the supply, field wiring, SC connection and electronic module together. Verify the existing wiring arrangement before transferring it to a replacement.

Editor's Note

The “16” in the name does not mean 16 module slots. Calculate capacity from the physical width of the selected modules and the station architecture. On a used base, check wire retention, module contact condition and whether the connecting cable is included. A clean exterior alone is insufficient.

PDF manuals and technical references

In the ET 200L, ET 200L-SC and ET 200L-SC IM-SC manual, section 7.4 covers the base, 3.5 covers wiring and 7.7 covers supplementary terminals. Visit Siemens ET 200 PDF and user manuals for the documentation page.

Related topics

ET 200 terminal blocks · ET 200 connection modules · ET 200 digital inputs · ET 200 digital outputs · ET 200 analog inputs

Quick links: Siemens ET 200 · Siemens S7 · Siemens S7 PLC · PLC and HMI · OtomasyonAVM home