6ES7 195-7HD00-0XA0

Siemens main menu › SIMATIC S7 › SIMATIC ET 200

Siemens 6ES7 195-7HD00-0XA0 — ET 200M BM IM/IM

Siemens 6ES7 195-7HD00-0XA0 is a BM IM/IM active bus module for ET 200M stations within the Siemens ET 200 distributed I/O family. It provides the backplane connection for a redundant arrangement of two interface modules. It is not a standalone PROFIBUS interface, power supply or field I/O module.

Order number: 6ES7195-7HD00-0XA0
Series: SIMATIC ET 200M
Component: BM IM/IM active bus module
Main application: Redundant interface arrangement with two IMs
Original reference arrangement: 2 × IM 153-2AA02 or 2 × IM 153-2AB01

Role within the station

In the ET 200 system architecture, the IM handling communication and the bus module behind it are separate components. The 7HD00 connects the two IMs to the station's backplane bus. When selecting ET 200 connection components, “compatible with IM 153” is insufficient: assess the bus module number, both fitted interfaces and project configuration together.

7HD00, 7HD10 and newer IM versions

The Siemens ET 200M manual separately describes the original IM 153-2AA02 / IM 153-2AB01 arrangement for 7HD00 and conditional combinations involving certain later interfaces. A newer IM listed among the ET 200 communication options does not necessarily provide its full functionality on an existing base. The permitted combination must also match the module selection in the Siemens S7 hardware project.

Important compatibility limit: Siemens explicitly states that the 6ES7153-2BA10-0XB0 interface cannot operate on 6ES7195-7HD00-0XA0. Do not treat 7HD10 and 7HD80 as identical parts either. When reviewing ET 200 additional modules and accessories, compare the complete order number, including its suffix.

Five checks before ordering or maintenance

1. Base identification: Read the bus module label itself and confirm 6ES7195-7HD00-0XA0; the fitted IM label is not enough. Establish whether the offered item is the base alone or an assembly including interfaces.

2. Both interface versions: Record the complete order number, hardware revision and firmware version of each IM. Do not select a replacement from only one interface label; check the manufacturer's permitted pair and configuration.

3. Mechanical arrangement: Inspect the rail, bus connections, contacts and fixing points. Do not confuse ET 200 terminal modules with this ET 200M active bus module. Assess installation suitability if locks are broken, contacts are bent or protective covers are missing.

4. Supply and fault diagnosis: A communication interruption does not by itself establish a faulty base. Check IM diagnostics, network connections and the arrangement of ET 200 power supply components together. Two interfaces do not automatically provide redundant power.

5. Replacement planning: Replacing an I/O module during operation is different from replacing its underlying bus infrastructure. Plan station downtime and follow the applicable Siemens maintenance procedure for base replacement; redundancy is not a guarantee of uninterrupted intervention.

It does not add I/O channels

BM IM/IM serves the interface connection and provides no analog or digital channels. When comparing ET 200 analog input modules and ET 200 output modules, verify the ET 200 subfamily separately. ET 200M, ET 200S and ET 200iSP components are not interchangeable simply because they share the ET 200 name.

Editor's note

Three labels are central to selecting this spare part: the bus base and both IM interfaces. Keeping their photographs with the project information helps prevent selection of an incompatible generation during later maintenance. Check base compatibility before deciding to install a newer IM. Explore other Siemens product groups through the Siemens main menu.

Manuals and PDF documentation

Use the ET 200M manual on our Siemens ET 200 PDF and user manuals page. Review the IM 153 compatibility tables together with the mechanical configuration and maintenance sections. For this older base, a current product heading is insufficient: use compatibility information explicitly covering 7HD00.

Related topics and Siemens navigation

Product family: Siemens main menu  |  SIMATIC S7  |  ET 200 family

Station and field devices: Terminal modules  |  Analog input modules  |  PROFIBUS and PROFINET

Technical resources: About ET 200  |  Power supply modules  |  ET 200 PDF manuals