6ES7 193-4CC30-0AA0
Siemens main menu › SIMATIC S7 › SIMATIC ET 200
Siemens 6ES7 193-4CC30-0AA0 — ET 200S TM-P15C23-A1 Terminal Module
6ES7 193-4CC30-0AA0 is the TM-P15C23-A1 terminal module for the ET 200S series within the Siemens ET 200 distributed I/O family. It provides the connection base for a power module. Its defining features are spring-type terminals, a 15 mm width and a continuous AUX1 bus.
Type: TM-P15C23-A1
Order number: 6ES7193-4CC30-0AA0
Connection: Spring-type terminals (Cage Clamp)
Terminal arrangement: 2 × 3 connections
AUX1: Continuous; accessible through A4 and A8
Dimensions (W × H × D): 15 × 132 × 43 mm
Approximate weight: 65 g
Distinguishing the base from the power module
Among ET 200 terminal blocks, this component is a TM-P base for a power module. The fitted electronic power module is a separate part; the base does not generate a supply voltage. When selecting ET 200 power supply modules, check the labels on both components.
Within the ET 200 system architecture, the TM-P base introduces the supply for a new potential group extending to the next TM-P base. The 2 × 3 terminal arrangement is not an I/O channel count.
What does continuous AUX1 mean?
AUX1 remains electrically connected to the potential group on the left. Terminals A4 and A8 provide access to this auxiliary bus. Therefore, starting a new potential group does not necessarily interrupt AUX1.
When reviewing the ET 200 power distribution arrangement, use the cabinet schematic to identify the intended role of AUX1. Do not assign a function based on the bus name alone. On an existing installation, compare the actual wiring with the current project documentation.
Differences from 4CC20 and 4CD30
6ES7193-4CC20-0AA0 is the screw-terminal alternative; 4CC30 uses spring terminals. 6ES7193-4CD30-0AA0 is the TM-P15C23-A0 version with an interrupted AUX1 bus. Similar housings or order numbers do not establish interchangeability.
When comparing ET 200 connection modules, check more than dimensions. The full order number, termination method, AUX1 arrangement and intended power module must all match the application.
Checks before ordering or maintenance
Identification and scope: Record the complete order number on the existing base. Confirm whether the offer includes only the base or also the electronic power module. Identify any required ET 200 additional modules and accessories separately.
Connections and condition: Inspect the spring terminals, side contacts and locking parts. Follow the applicable Siemens instructions for conductor preparation and installation. Cleaning alone does not establish that a damaged or overheated component is suitable for reuse.
Fault assessment: If several ET 200 digital input modules, ET 200 analog input modules or ET 200 digital output modules develop problems together, include their shared supply and connections in the investigation. Compare the symptoms with diagnostics from the ET 200 communication interface; a group fault alone does not prove that the terminal base has failed.
Editor's note
Include clear photographs of the base label, fitted module label and connections with a spare-part enquiry. Compare these with the cabinet schematic. Pay particular attention to the difference between the 4CC and 4CD order codes.
Manuals and PDF documentation
Find the relevant documents on our Siemens ET 200 PDF and user manuals page. For this base, consult ET 200S Terminal Modules, A5E01120034-01, section 1.2 alongside the manual for the installed power module. Use the terminal diagram that applies to the actual hardware when planning connections.
Related topics and Siemens navigation
Siemens products: Siemens main menu | SIMATIC S7 | ET 200 family
Power and connections: Power supply modules | Terminal blocks | Power distribution modules
Technical resources: About ET 200 | Connection modules | ET 200 PDF manuals