6ES7 138-4AA01-0AA0

Siemens 6ES7 138-4AA01-0AA0 – ET 200S RESERVE Module

6ES7 138-4AA01-0AA0 is a 15 mm reserve module for keeping unused electronic module positions available in a Siemens SIMATIC ET 200S station. The RESERVE marking identifies its purpose. The article number without spaces is 6ES7138-4AA01-0AA0.

Technical specifications and packaging

One module measures 15 × 81 × 52 mm (width × height × depth), weighs approximately 33 g and has a typical power loss of 0.025 W. The specified number of digital inputs is 0. Siemens lists 5 modules per packaging unit; the supplied quantity should be stated separately for individual or second-hand sales. The module has no status indication or diagnostic function of its own.

Terminal connection and application

It fits a suitable TM-E terminal module without electrically connecting to its terminals, allowing field wiring to be prepared for the future electronic module. 6ES7138-4AA11-0AA0 is the separate 30 mm version; check the installation width before selecting either article.

Configuration and diagnostics

Without option handling, configure the future electronic module and allow operation with differing configured/actual layouts. Match the address space to that module. This method produces an interface SF indication and 10B: Wrong module status.

Option handling requires a supporting interface, suitable power module and correct slot settings. For example, the PROFIBUS arrangement documented for IM151-1 STANDARD 6ES7151-1AA06-0AB0 uses a PM-E entry ending in …O or …SO to provide the control/feedback interface. Correctly managing an enabled reserve slot avoids the incorrect-module diagnostic. For PROFINET, follow the applicable IM151-3 documentation.

Input substitute values for reserve positions can be 0 for digital inputs and 7FFFH for analog inputs. Treat these as substitute data, rather than actual field measurements.

Compatibility with older interfaces

6ES7151-1AA00-0AB0 does not support RESERVE modules. After replacing an electronic module with RESERVE during operation, cycle the interface supply on 6ES7151-1AA01-0AB0, 6ES7151-1AA02-0AB0, 6ES7151-1AB00-0AB0, 6ES7151-1AB01-0AB0 and 6ES7151-7AA00-0AB0.

Editor's note

Our selection advice is to specify the module number, terminal base, installed IM number and required quantity together. When investigating an SF indication, first check how the slot is configured in the project. Label the reserved I/O position consistently in the cabinet drawings and PLC project to make later expansion easier to manage.

PDF manuals and technical documentation

Consult the Siemens RESERVE module (6ES7138-4AAx1-0AA0) manual, A5E01077625-01, together with the option handling section for the installed interface. Visit Siemens ET 200 user manuals and PDF documents for documentation.

Related topics

Additional modules · Terminal blocks · Connection modules · PROFIBUS and PROFINET · Power supply modules · Power distribution modules · Digital input modules · Digital output modules · Analog input modules · Special input modules · Special output modules · Functional modules · About ET 200

Navigation: Siemens ET 200 · SIMATIC S7 · Siemens S7 PLC · PLC and HMI