DGP-99T-A Step Profile Temperature Controller

220V AC Power Supply | 1 SSR + 1 Relay Output | 96x96 mm Size

  • Multi-Step Profile Control: Designed for precise temperature profiling, allowing unique temperature levels and time durations to be defined for each step.
  • High Precision: Provides exceptional measurement accuracy thanks to its next-generation temperature compensation system and 32-bit microprocessor.
  • Decimal Readout: High-resolution reading capability supporting decimal point notation across all compatible sensor types.
  • Advanced Profile Capacity: Supports up to 20 programmable steps, with a maximum time setting of 18 hours per step.
  • Power-Off Memory (Reserve Function): Automatically saves the current step and remaining time in the event of a power failure. Once power is restored, it safely resumes from where it left off, provided the measured temperature is within the user-defined zone.

Sensor Failure Protection: If the connected sensor fails or breaks, the device continues heating at a pre-set output ratio (highly useful for maintaining process continuity during PID control).

OFFSET Function: In applications with long cable runs or challenging sensor placements where temperature discrepancies occur, the device compensates for the variance to determine the actual process value.

Heating / Cooling Support: This model features both heating and cooling functions. During heating processes, if the zone temperature rises unintentionally, the 2nd output can be utilized for cooling (the same logic applies conversely to cooling applications).

Defrost Feature: A dedicated defrost cycle time can be defined for refrigeration and cooling applications.

Control Methods: Offers Advanced PID, PID Auto-Tuning, and ON-OFF control modes. Utilizing the latest PID algorithm, it delivers outstanding performance down to 0.1°C (results may vary depending on the mechanical system structure).

Enhanced PID Functions: Features zero-crossing periodic wave adjustment with random triggering and phase-angle random triggering. It also supports Soft-Start functionality for applications requiring a gradual power ramp-up.

Display Structure: Equipped with a dual, 4-digit, 7-segment LED display. Setpoint displays can be hidden via programming if desired. Maximum hysteresis range is 50°C (set to "0" in PID mode).

Secure Limit Lock: Password-protected upper and lower limits can be assigned to user setpoints. For instance, if a furnace process must not drop below 145°C or exceed 180°C, setting these boundaries prevents operators from accidentally entering unsafe values.

Supported Sensor Models: K, E, J, F, T, S, R, B, N and Pt100 (Please refer to the "Specifications" tab for the maximum temperature ranges of each sensor group.)

Output Type: 1x SSR drive output comes standard. Additionally, it features 1x internal relay (for heating/cooling) and 1x auxiliary relay which can be assigned to alarm, proportional, or band values based on preference.

Analog and PWM Output: This model does not support analog output. If your application requires an analog or pulse output, please check the DSPRO Models.

Communication: RS485 Modbus RTU communication is optional. It allows PC programming and communication with external PLCs and HMI panels. If you require Modbus communication as a standard feature, you may prefer the DSPRO Series Temperature Controllers.

* Mounting and panel cutout dimensions are provided in the product images. The image displays the exact product. Wiring diagrams and further technical details can be found under the "Specifications" tab. This device is designed for basic temperature control in light industrial environments; it does not hold certification for military, marine, or medical applications. For detailed technical support, please visit the Derell Elektronik website.

• 24V AC/DC power supply model for this device: NOT AVAILABLE (Custom production can be arranged for orders of 10 units or more).
• • One size smaller variant (72x72 mm): Click here for the DGP-77-T-A model.
• • • One size larger variant: NOT AVAILABLE
Editor's Note:

The DGP is a dedicated "Step-Profile" controller. It is completely normal that it isn't as widely common as standard controllers in the market, as it is engineered for highly specific applications. Simply put; once a start command is given, the device sequentially follows your pre-configured target temperatures and time durations profile-by-profile, shifting to the stop position upon completion. It delivers excellent PID control performance during both heating and cooling stages. The dual-output architecture offers outstanding flexibility for assigning auxiliary tasks. Measurement sensitivity is top-tier; backed by a 32-bit microprocessor, it captures even the smallest fluctuations instantly. Its PID algorithm stands fully competitive against high-end European counterparts. In demanding systems where stabilizing the temperature profile is notoriously difficult, you will clearly experience the smooth comfort and stability of this advanced PID algorithm.

Write a review

Note: HTML is not translated!
Bad Good

DGP-99T-A Step Profile Temperature Controller

  • 50.00USD

  • Ex Tax: 50.00USD

Related Products

 DGP-77R-A Step Temperature Controller

DGP-77R-A Step Temperature Controller

DGP-77R-A Step Temperature Controller DGP-77R-A is a step temperature controller with..

48.00USD Ex Tax: 48.00USD

 DGP-99R-A Process Control Device

DGP-99R-A Process Control Device

DGP-99R-A Process Control Device DGP-99R-A is a 220V powered process control device with ..

42.00USD Ex Tax: 42.00USD

 DGP-77T-A Step Temperature Controller with SSR Output

DGP-77T-A Step Temperature Controller with SSR Output

DGP-77T-A Step Temperature Controller with SSR Output DGP-77T-A is a compact step tempera..

49.00USD Ex Tax: 49.00USD