DGP-77R-A Step Temperature Controller
DGP-77R-A is a step temperature controller with 220 VAC power supply, 2 relay outputs and 72 × 72 mm panel size.
Separate temperature set value and separate time value can be defined for each step. It can be used in ovens, drying systems, heat treatment machines, laboratory equipment, plastic machines and similar temperature control applications.
High measurement accuracy with new generation temperature measurement compensation.
Mounting and panel cut-out dimensions can be found in the product image. For power supply and other technical details, please check the Specifications tab.
Supported Sensor Types
Supported sensor types: K, E, J, F, T, S, R, B, N and PT100 . Please check the Specifications tab for the maximum temperature range of each sensor type.
The device can read supported sensor types with decimal point resolution.
Step Control Features
+ Maximum 20 steps can be selected.
+ Maximum 18 hours can be set for each step.
+ Different temperature and time values can be defined for each step.
+ After start command, the controller follows the defined steps and returns to stop mode when the process is completed.
Reserve function: When power is interrupted, the device stores the current step and remaining time in memory. When power is restored, if the measured temperature is within the defined range, it continues from where it stopped.
Control Functions
If the connected sensor fails or breaks, the device can continue heating according to the user-defined output ratio.
If sensor cable distance is long or measurement difference occurs, the OFFSET function can be used to compensate the difference.
The device supports both heating and cooling functions. The second relay output can be used for cooling, alarm or auxiliary control.
Defrost time can be defined for cooling applications.
Control Method
Control method: PID, PID auto-tuning and ON-OFF control mode. Depending on the application, it can provide control performance down to 0.1°C.
Output Type
1st relay output: Can be used for heating or cooling control.
2nd relay output: Can be assigned to alarm, cooling, proportional control, relative band or auxiliary process functions.
Analog and PWM output: Not available. If analog output or pulse output is required, please check DSPRO models .
Accuracy: %0.3 FS measurement accuracy.
Display: Dual display, 4-digit, 7-segment LED display. Set display can be disabled from the program if required.
Hysteresis: Maximum 50°C hysteresis range. In PID mode, this value can be set to “0”.
Password-protected limits can be assigned to user set values. This prevents the operator from entering values outside the defined upper and lower limits.
Additional PID function: Zero-cross periodic wave setting, random trigger and phase-angle random trigger.
Soft start function is available for applications that require controlled restart.
Communication
Modbus and PC communication: Optional.
RS485 Modbus RTU communication and PC programming are supported. The device can communicate with PLC and HMI systems. This feature is standard in DSPRO series temperature control models .
Application Note
This device is designed for basic temperature control in light industrial environments. It is not certified for military, marine or medical applications.
Related Models and Links
+
24V AC/DC powered version: Not available
Production may be possible for orders of 10 pcs or more.
+ Smaller size version: Not available 48 × 48 mm.
+ Larger size version: DGP-99R-A 96 × 96 mm.
Editor's Note:
DGP series is a step temperature controller. It is suitable for applications that require multiple temperature steps and process timing.
When start command is given, the controller follows the defined steps, temperature values and time values. When the process is completed, it returns to stop mode.
With 2 relay outputs, heating, cooling, alarm and auxiliary process functions can be controlled from the same device.
It can be used in industrial ovens, drying systems, heat treatment systems, laboratory devices, plastic machines and similar temperature control applications.
DGP-77R-A Step Temperature Controller
- Mağaza: Efes Otomasyon
- Store: Efes Automation
- Brands DERELL
- Product Code: DGP-77-R-A
- Availability: 1
-
48.00USD
- Ex Tax: 48.00USD
Related Products
DGP-99R-A Process Control Device
DGP-99R-A Process Control Device DGP-99R-A is a 220V powered process control device with ..
42.00USD Ex Tax: 42.00USD
DGP-77T-A Step Temperature Controller with SSR Output
DGP-77T-A Step Temperature Controller with SSR Output DGP-77T-A is a compact step tempera..
49.00USD Ex Tax: 49.00USD
DGP-99T-A Step Profile Temperature Controller
DGP-99T-A Step Profile Temperature Controller 220V AC Power Supply | 1 SSR + 1 Relay Output ..
50.00USD Ex Tax: 50.00USD







