DGP-77T-A Step Temperature Controller with SSR Output
DGP-77T-A is a compact step temperature controller designed for industrial heating and cooling applications. It has a 220 VAC power supply, 1 SSR output, 1 relay output and a 72 × 72 mm panel size.
This controller allows the user to define a separate temperature setpoint and a separate operating time for each step. It is suitable for ovens, furnaces, drying systems, heat treatment machines, laboratory equipment, plastic processing machines and similar temperature-based process applications.
High measurement accuracy with new generation temperature measurement compensation.
Mounting and panel cut-out dimensions can be found in the product image. The image belongs to the product. For power supply and other technical details, please check the Specifications tab.
Supported Sensor Types
Supported sensor types: K, E, J, F, T, S, R, B, N and PT100 . Please check the Specifications tab for the maximum temperature range of each sensor group.
The device can read all supported sensor types with decimal point resolution. This helps provide more accurate temperature monitoring in sensitive applications.
Step Control Features
+ Up to 20 steps can be selected.
+ Maximum 18 hours can be set for each step.
+ Different temperature and time values can be defined for every step.
+ After the start command, the device follows the defined steps and returns to stop mode when the process is completed.
Reserve function: When the power supply is interrupted, the device stores the current step and the remaining time in memory. When power is restored, if the measured temperature is within the user-defined range, the controller continues from where it stopped.
Control and Protection Functions
If the connected sensor fails or breaks, the device can continue heating according to the user-defined output ratio. This feature is especially useful in PID control applications.
If the cable distance is too long, the sensor mounting point is not ideal, or a temperature difference occurs, the device can compensate this difference by using the OFFSET function.
This model supports both heating and cooling functions. While heating, if the controlled area rises above the desired temperature unintentionally, the second output can be used for cooling. The same logic can also be used in cooling applications.
A defrost time can be defined for cooling applications.
Control Method
Control method: PID, PID auto-tuning and ON-OFF control mode. With its latest PID algorithm, it can provide successful performance down to 0.1°C, depending on the application and mechanism.
Output Configuration
SSR output: The device has 1 SSR output for fast and precise PID temperature control. This output is suitable for driving external solid state relays in heating applications.
Relay output: The second output is a relay output. It can be assigned to alarm, cooling, proportional control, relative band or other auxiliary functions depending on the application.
Analog and PWM output: Not available. If analog output or pulse output is required, please check DSPRO models .
Accuracy: %0.3 FS measurement accuracy.
Display: Dual display, 4-digit, 7-segment LED display. Set displays can be disabled from the program if required.
Hysteresis: Maximum 50°C hysteresis range. In PID mode, this value can be set to “0”.
Password-protected limits can be assigned to user set values. For example, if a process becomes problematic above 180°C or below 145°C, upper and lower limits can be defined to prevent the operator from entering values outside this range.
Additional PID function: Zero-cross periodic wave adjustment, random trigger and phase-angle random trigger.
Soft start function is available for applications that require controlled restarting.
Communication
Modbus and PC communication: Optional.
RS485 Modbus RTU communication and PC programming are supported. The device can communicate with external PLC and HMI systems. This feature is standard in DSPRO series temperature control models .
Application Note
This device is designed for basic temperature control in light industrial environments. It does not have certification for military, marine or medical applications. For detailed information, please check the Derell Electronics website.
Related Models and Links
+
24V AC/DC powered version of this device: Not available
Production may be possible for orders of 10 pcs or more.
+ One smaller size of this device: Not available 48 × 48 mm.
+ One larger size of this device: DGP-99R-A 96 × 96 mm.
Editor's Note:
The DGP series is not a conventional temperature controller. It is a step-based temperature control device developed for applications that require multiple temperature stages and programmable process timing.
When a start command is given, the controller follows the previously defined number of steps, temperature values and time values. When the process is completed, it automatically returns to stop mode. PID control can also be used during heating or cooling steps.
The SSR output provides a serious advantage in applications requiring fast and stable PID control. The additional relay output can be used for alarm, cooling or other auxiliary process functions.
Thanks to its 32-bit processor, advanced PID algorithm and high measurement accuracy, the controller can deliver stable temperature regulation even in demanding industrial applications.
It is especially suitable for industrial ovens, furnaces, heat treatment systems, drying equipment, laboratory devices, plastic processing machines and similar thermal process applications.
DGP-77T-A Step Temperature Controller with SSR Output
- Mağaza: Efes Otomasyon
- Store: Efes Automation
- Brands DERELL
- Product Code: DGP-77-T-A
- Availability: 1
-
49.00USD
- Ex Tax: 49.00USD
Related Products
DGP-77R-A Step Temperature Controller
DGP-77R-A Step Temperature Controller DGP-77R-A is a step temperature controller with..
48.00USD Ex Tax: 48.00USD
DGP-99R-A Process Control Device
DGP-99R-A Process Control Device DGP-99R-A is a 220V powered process control device with ..
42.00USD Ex Tax: 42.00USD
DGP-99T-A Step Profile Temperature Controller
DGP-99T-A Step Profile Temperature Controller 220V AC Power Supply | 1 SSR + 1 Relay Output ..
50.00USD Ex Tax: 50.00USD





