- 0.4 kw 220 volt GD10-0R4G-S2-B

   GD10 is an economical model with wide operation capabilities for 3 phase AC motor speed control . It is suitable more for aplicaitons such as fan and pumps

Dear members, the model you are examining; It has 1 phase 220 volt input, 3 phase output 0.75 kW 1 hp output power.

   You can use the model you are examining for 1 phase 220 volt input 3 phase output 0.4 kW or for motors with lower powers. The visuals are the visuals of the device itself, and the technical data below have been written by our technical staff.
Please consider the following data before choosing a product.

Function Specification
Single-phase: 220(-15%)–240(+10%)
Input current: 
Input frequency: (Hz) 50Hz or 60Hz Allowed range: 47–63Hz
Output voltage: (V)=the input voltage (error＜5%)
Power Output current:  2.5 Amp.
Output power (kW): 0.4 kw
Output frequency: (Hz ) 50 Hz/60 Hz, fluctuation: ±5%
Control mode: SVPWM
Maximum outputcontrol: 400Hz frequency

Input fuse: 2 * 6 or 2 * 10 Amps (for phase and neutral)

External potentiometer: 2.2 k ohm to 10 k ohm

Braking resistor: 722 ohms to 600 ohms (according to inertia)

Type 380 volt input: GD20-0R7G-4-EU

One size big power model: 0.75 kw GD10-0R7G-S2-B

One size small power model: no

Display transport: Portable> with RJ45 socket

For solar systems: Not efficient. Click to go Solar pages .

Sensor switchboard output: Yes, there is 24 vdc output,

Dimensions (W, B, Y): 85 mm, 140 mm, 135 mm

PC program:  INVT-Workshop v2.1.6

Adjustable-speed ratio: 1:100
Overload capability: 150% of rated current: 1 minute 180% of rated current, 10 seconds, 200% of rated current: 1 second
Key functions: Stop mode and anti-overtemperature of the bus

Temperature measurement accuracy: Overtemperature point  ±3°C
Terminal switch input resolution: ≤ 2ms
Terminal analog input resolution:  ≤ 20mV
Analog input: 1 input 0–10V/0–20mA
Analog output: 1 output 0–10V/0–20mA
Digital input: 5 common input
Digital output: 1 pogrammable relay output
Communication: 485 communication
PID setting : Yes

> invt GD10 User manual (Pdf)

> invt commissioning and videos -

+ Invt ac drive FAULT CODEs 

Frequency setting

Digital setting, analog setting, multi-step speed setting,control, PID setting, MODBUS communication setting and so on Switch between different setting
Automatic voltage adjustment:  Keep output voltage stable when the grid voltage changes
Fault protection: More than 10 fault protections
Cooling: Single/three-phase 220V 0.2-0.75kW natural cooling,
Braking unit: Embedded DC reactor Not
Optional filter: C3 or C2 filter

Combination type of the setting source
1:Terminal running command channel (“LOCAL/REMOT”flickering) Carry out the running command control by the forward rotation, reverse rotation and forward jogging and reverse jogging of the multi-function

2:Communication running command  channel (“LOCAL/REMOT” on)；The running command is controlled by the upper monitorvia communication
0: A, the current frequency setting is A freauency command
1: B, the current frequency setting is B frequency command
2: A+B, the current frequency setting is A frequency command + B frequency commandCombination
3: A-B, the current frequency setting isAfrequency command -B frequency command P00.09type of the0○
4: Max (A, B): The bigger one between A frequency setting source command and B frequency is the set frequency.
5: Min (A, B): The lower one between A frequency command and B frequency is the set frequency.

> invt price list -

Note: The combination manner can be shifted by P05 (terminal function)

-

Editor's Note: Gooddrive10 inverter speed control devices are economical priced models that have proven themselves and have worked without problems for many years. This model should be preferred for light applications. Efficient operation in places such as fans, pumps, transfer machines, etc. is fixed with experience. Since there is 220 volt production up to 2.2 kw, there is no power range suitable for every use. On the other hand, you can continue on your way with high power, upper segment GD20 series devices. We have prepared training documents that are easy to commission and easy to understand. Please have a look. It can be preferred in economical applications. (reflects my personal opinion)

Attention please !! All assembly of INVT GD10 drives should ONLY be performed by qualified technical personnel. Installation must always be carried out in accordance with applicable (2006/42 / EC) relevant ministry laws or regulations. Otomasyon AVM does not accept any responsibility for installations and individuals that violate local laws and / or other regulations (for overseas sales). Instructions given by INVT no, the device is under warranty coverage. This detailed information is detailed in detail. For detailed information, you can contact invt@otomasyonavm.com.