6GK1 901-1BB20-2AA0

6GK1 901-1BB20-2AA0 Siemens FastConnect RJ45 Connector

6GK1 901-1BB20-2AA0 is the IE FC RJ45 Plug 90 (2×2) industrial Ethernet connector from the Siemens automation product range. It combines a metal housing, FastConnect termination and a 90° cable outlet to connect a suitable industrial network cable to an RJ45 device port. This order number specifies a manufacturer pack containing one connector.

Designed for industrial Ethernet connections at 10/100 Mbit/s, this model accepts suitable IE FC TP Cable 2×2. Its four conductors terminate through FastConnect insulation-displacement contacts. Cable suitability must be checked against the manufacturer's requirements rather than judged by appearance.

Its role in an ET 200 installation

This product is a cable connector, not an I/O module or communication processor. In Siemens ET 200 distributed I/O systems, it can serve interfaces with a suitable RJ45 Ethernet port, subject to the device's connection requirements. Check the exact interface model, clearance around the port and cable exit direction before selecting it.

Suitability for PROFINET network cabling does not establish compatibility with every ET 200 station. Interfaces using PROFIBUS, M12 or specially protected connectors require a different assessment. The ET 200 system overview provides further background on the product family.

Key technical specifications

Product family: SIMATIC NET, IE FC RJ45 Plug 90 (2×2). Connection: RJ45 with FastConnect termination. Data rate: 10/100 Mbit/s. Cable outlet: 90°. Housing: metal. Protection rating: IP20.

Conductor termination: insulation-displacement contacts for four-wire AWG22 FC installation cable. Dimensions: 13.7 × 16 × 42 mm (width × height × depth). Net weight: 35 g. Operating temperature: −40…+85 °C. These ratings apply to the connector; the cable and connected equipment must also meet the installation requirements.

Five checks before ordering

1. Device and port compatibility: When choosing Siemens PLC and communication accessories, use the complete device order number. A shared manufacturer or product family does not establish connector compatibility.

2. Cable construction: Confirm IE FC TP 2×2 compatibility. Do not treat this model as a universal plug for every Ethernet cable or as a connector specified for 1 Gbit/s operation.

3. Installation clearance: Check the direction of the 90° outlet, adjacent ports and the cable's required bending space. On SIMATIC S7 control systems, port position can be an important part of connector selection.

4. Environmental protection: An IP20 housing is not a waterproof field connection. For industrial automation installations, complete shielding, cable routing and mechanical support in accordance with the relevant installation instructions.

5. Pack quantity: 6GK1901-1BB20-2AA0 contains 1 unit, 6GK1901-1BB20-2AB0 contains 10 units, and 6GK1901-1BB20-2AE0 contains 50 units per manufacturer pack. Check whether a quotation is priced per connector or per pack.

If communication is unreliable

Start by inspecting conductor termination, shield contact and whether the connector is fully seated. Then review diagnostics from the PLC and control equipment. A communication warning on an HMI operator panel or a SCADA monitoring system does not, by itself, identify a faulty connector.

Editor's note

The first three checks are cable compatibility, the direction of the 90° outlet and pack quantity. A correctly selected connector cannot compensate for poor cable preparation. When inspecting a used connector, examine the locking mechanism and termination contacts as carefully as the housing.

Manuals and PDF documentation

Visit the Siemens ET 200 manuals and PDF links page for station and interface documentation. For cable preparation and connector assembly, follow the Siemens FastConnect installation instructions covering the exact connector order number.

Related topics and Siemens navigation

Siemens product guide
Siemens main menu  |  Siemens PLC products  |  SIMATIC S7 family

ET 200 resources
ET 200 products  |  ET 200 system overview  |  ET 200 PDF manuals

Networks and assistance
What is PROFINET?  |  Ethernet fundamentals  |  Contact us about Siemens products