6ES7 195-7HA00-0XA0
Siemens main menu › SIMATIC S7 › SIMATIC ET 200
Siemens 6ES7 195-7HA00-0XA0 — ET 200M BM PS/IM
Siemens 6ES7 195-7HA00-0XA0 is a BM PS/IM active bus module for ET 200M stations within the Siemens ET 200 distributed I/O family. It is designed to accommodate one power supply and one IM 153 interface. It forms part of the bus infrastructure for a station configured for module replacement during operation; the power supply and IM interface are separate components.
Order number: 6ES7195-7HA00-0XA0
Series / function: SIMATIC ET 200M / BM PS/IM
Arrangement: One PS and one IM 153
Dimensions (W × H × D): 97 × 92 × 30 mm
Approximate weight: 111 g
Manufacturer's supply description: Bus module cover included
Role of the PS/IM base
Within the ET 200 system architecture, the power supply, communication interface and bus base perform different tasks. The 7HA00 is the base component of this arrangement; it neither converts mains voltage to 24 V nor communicates independently. When selecting ET 200 power supply components and ET 200 communication options, include the exact base order number in the parts list.
An important mechanical limit when selecting PS 307
The Siemens ET 200M manual specifies a PS 307; 2 A arrangement alongside the IM on BM PS/IM. The 5 A and 10 A PS 307 versions do not fit this base and require a separate standard S7 rail. Here, 2 A is the power supply output rating, not a current rating for the 7HA00 bus module. When planning ET 200 power distribution, assess power requirements and mechanical placement separately.
Five checks before ordering and installation
1. Component identification: Look for 6ES7195-7HA00-0XA0 on the label. A similar-looking item among the ET 200 connection components is insufficient. Distinguish the PS/IM base from the BM IM/IM arrangement for two interfaces.
2. Power supply and interface: Record the full PS and IM model numbers. A “24 V” power supply description alone does not establish mechanical compatibility. Compare the interface selected in the Siemens S7 hardware project with the installed label and the manufacturer's system requirements.
3. Suitable mounting rail: Active bus modules require the Siemens rail intended for the module-replacement-during-operation arrangement. Do not select a standard rail solely because its length matches. Also distinguish ET 200 terminal modules from the BM PS/IM mounting component.
4. Covers and delivery scope: The manufacturer's description includes a bus module cover. Check its actual presence, especially on a used part. The cover for the last bus module differs from the backplane bus cover for an empty slot; prepare the required ET 200 additional modules and accessories list from the actual station layout.
5. Replacement during operation: This base does not mean that every component can be removed while energized. Confirm that the module being replaced, the interface and project settings support the procedure. For replacement of the bus base itself, plan downtime and follow the manufacturer's maintenance procedure.
7HA, 7HB and 7HC have different roles
7HA00 serves the PS/IM arrangement. 7HB00 accommodates two 40 mm I/O modules, while 7HC00 accommodates one 80 mm I/O module. For example, when researching ET 200 analog input modules, the ET 200 name alone is insufficient: verify the subfamily, module width and required base together.
Editor's note
A common selection mistake is assuming that PS/IM means a power supply is included. Before ordering, check the base, power supply, interface and covers separately. The base dimensions are not the overall dimensions of the completed station. Explore other product groups through the Siemens main menu.
Manuals and PDF documentation
Use the ET 200M documents on our Siemens ET 200 PDF and user manuals page. Read the mechanical arrangement, active bus module installation and maintenance sections together. The product data sheet provides dimensions; the system manual is also required for correct station assembly.
Related topics and Siemens navigation
Product family: Siemens main menu | SIMATIC S7 | ET 200 family
Station and field devices: Terminal modules | Connection components | PROFIBUS and PROFINET
Technical resources: About ET 200 | Power supply modules | ET 200 PDF manuals