6ES7 194-1AA01-0XA0
Siemens 6ES7194-1AA01-0XA0 ET200X / ASM450 IP65 Connection Plug
Siemens 6ES7194-1AA01-0XA0 is an IP65 connection plug with metric cable glands for PROFIBUS DP and power supply connections. Siemens product data identifies it for ET200X BM141, BM142 and BM147 basic modules and, under the SIMATIC Ident description, for ASM450. Documentation also writes the order number as 6ES7 194-1AA01-0XA0.
Application and product selection
This accessory is selected when preparing the station's communication and electrical connections. For a PLC installation, first identify the exact order number of the connected device and the socket being used. When servicing an existing station, recording the removed component's marking and taking a photograph of the connection area helps establish the correct match.
The intended power supply circuit should also be stated in the enquiry. Identifying the electronics/sensor supply, load supply and data connection allows the connector and cable requirements to be assessed together.
Six-pin construction and M16 cable glands
The ET200X manual lists a protective shell, six-pin connector, two M16 cable glands and two lock nuts for this order number. The permitted cable outside diameter is 4–10 mm. M16 identifies the cable entry gland; the device connection uses the six-pin insert.
Check that the cable sheath fits the gland, conductor ends are properly prepared and the housing closes completely. If components will be transferred into an existing shell, compare the thread size, seal and fastening parts as well.
Three connectors per device
Siemens specifies three connectors per basic module in the BM141/BM142/BM147 description and three per ASM in the ASM450 description. This states the device's connection requirement. The quantity to purchase, the quoted delivery contents and any parts being reused from the existing station should be established separately.
For maintenance, state whether the requirement concerns one damaged connector or the complete set of connections. Assessing the shell, insert, glands and nuts together helps prevent installation delays caused by missing components.
Cable selection and pin assignment
The manual identifies 6ES7194-1LY00-0AA0 for the combined bus/supply cable option. The bus/supply and load supply sockets have different pin assignments. Follow the diagram for the particular device and socket.
When reviewing the RS-485 connection arrangement, trace the data conductors, shield, supply and protective earth according to their individual functions. Marking the existing conductors and keeping a connection record before replacement makes the final inspection easier. Verify the pin function as well as the wire colour.
Cable gland difference between 1AA00 and 1AA01
Siemens' 1999 MOBY V manual lists 6ES7194-1AA00-0XA0 with the ASM450's PG11 connection arrangement. 6ES7194-1AA01-0XA0 is documented with M16 metric glands. This distinction matters when maintenance involves reusing an older gland or housing component.
Assess a replacement by comparing the complete connector assembly, the device's mating interface and the intended cable. Confirm the installed arrangement and manufacturer instructions before changing models; similar order numbers alone do not establish suitability.
Editor's note
For an enquiry, provide order number 6ES7194-1AA01-0XA0, the device model, required quantity, cable outside diameter and a photograph of the existing connection. Check cable entries, seals and unused connection openings as part of an installation consistent with the IP65 product description. See the Siemens ET200 manuals for installation details. Availability and the contents of the supplied assembly should be confirmed with the quotation.
Related topics
For control and monitoring, explore PLC and HMI systems, operator panels and SCADA. For system research, see Siemens S7-300, about Siemens ET 200 and ET 200 PROFIBUS and PROFINET.
Other module groups: ET 200 analog input modules · Digital input modules · Digital output modules · Connection modules · Additional modules.
Navigation: Siemens ET 200 · Siemens SIMATIC S7 · Siemens S7 PLC · OtomasyonAVM home