6ES7 193-1CH00-0XA0

Siemens 6ES7 193-1CH00-0XA0 — ET 200L TB 16L Screw Terminal Block

The Siemens 6ES7 193-1CH00-0XA0 is a 16-channel TB 16L terminal block with screw connections for the ET 200L system. Part of the SIMATIC ET 200 range, it supports the electronics block and carries the fixed sensor, load and supply wiring. It belongs to the ET 200 terminal block family.

TB 16L is the connection base; the installed electronics block determines the station’s function. It is not a complete input or output module on its own. The electronics provide the digital input or digital output functions used by the PLC.

Main terminal block or supplementary terminal?

6ES7193-1CH00-0XA0 is the main terminal block. Parts such as 6ES7193-1FH20-0XA0 and 6ES7193-1FH60-0XA0 are supplementary terminals that add wiring tiers to the arrangement. The main base, supplementary terminal and electronics block have separate order numbers.

Identify the damaged component before selecting a spare. A broken housing or damaged clamping mechanism may require a terminal block. A signal-processing or communication fault requires a separate assessment of the electronics. Our ET 200 connection modules section covers other connection components, and the ET 200 overview explains the different system families.

Compatible electronics blocks

The October 2005 Siemens ET 200L manual lists 6ES7131-1BH01-0XB0 — 16 DI, 24 V DC and 6ES7132-1BH00-0XB0 — 16 DO, 24 V DC/0.5 A for TB 16L. The 0.5 A figure belongs to the output electronics’ channel specification; it is not a general current rating for this terminal block.

If the installed electronics have a different order number, use the manufacturer documentation covering that version. A mechanical fit does not establish identical functionality, terminal use or project settings. Changing an input block to an output block is more than a mechanical replacement.

Understanding the terminal numbers

Terminals 1–8 and 9–16 carry the signals for two groups of eight channels. 17–24 and 25–32 provide sensor supply connections in an input application or common return connections in an output application. Follow the diagram for the installed electronics block.

A terminal numbered 32 does not make this a 32-channel I/O base. TB 16L serves a 16-channel arrangement. Signal terminals and supply or return terminals have different roles, even though they appear within the same numbering sequence.

Supply groups and internal connections

1L+ supplies channel group A. Internally linked 2L+/3L+ supply group B, while internally linked 4L+/5L+ supply the electronics. 1M–5M share a common connection. Separate supply groups should not be interpreted as complete galvanic isolation between every circuit.

This distinction is useful during maintenance. The electronics may appear operational while a field supply group is missing. Conversely, voltage at a sensor does not prove that the electronics have the correct supply. Check the relevant supply pairs against the actual wiring diagram.

Power supply modules and power distribution components perform different functions. The supply terminals on TB 16L route an incoming supply; they do not generate it.

Dimensions and cabinet space

The Siemens data sheet dated 17 March 2017 gives a width of 145 mm, height of 100 mm and depth of 40.5 mm, with an approximate weight of 230 g. These are the terminal block’s specifications. Allow separately for the installed electronics and communication connector.

The manual’s installation example specifies a depth of 82 mm with the electronics block and 6ES7972-0CA30-0XA0 bus connector fitted. Using the bare block’s 40.5 mm depth alone would therefore underestimate the required clearance. Cable bends and maintenance access also need space.

Mounting and screw-terminal wiring

TB 16L mounts on a 35 mm DIN rail. Siemens specifies a 0.4–0.7 Nm tightening range for the screw connections and uses 0.5 Nm in the wiring procedure. Select conductor sizes, ferrules and stripping lengths from the applicable wiring table.

Keeping the field wiring on the base can simplify electronics replacement. It does not establish permission to replace components while energised. Before intervention, place the machine in a safe state, isolate the relevant supplies and verify that the circuit is de-energised.

Check the rail latches, electronics seating surfaces and contacts during installation. A screw that turns without securing the conductor may have a damaged thread or clamping element. Confirm that the conductor—not its insulation—is correctly clamped and that cable strain is not transferred to the terminal.

Sensor wiring and supplementary terminals

For an inductive sensor, assess the supply, common and signal conductors together. PNP/NPN and sinking/sourcing compatibility depend on the input electronics. A two-wire sensor also has different connection requirements from a three-wire sensor.

Where additional common connections are required, suitable accessories include the single-tier screw FH20 and two-tier spring FH60. Supplementary terminal tiers are internally bridged, so their positions must not be used indiscriminately for unrelated sensor signals.

Communication and similar part numbers

PROFIBUS DP communication resides in the electronics block. TB 16L has no separate network address or user program. Moving to PROFINET requires appropriate communication hardware; changing the terminal base does not provide that conversion.

6ES7193-1CH00-0XA0 is the screw-terminal TB 16L, while 6ES7193-1CH10-0XA0 uses spring terminals. TB 32L is a separate 32-channel base family. Match the full order number, channel arrangement, electronics block and connection type when selecting a replacement.

Practical fault finding

For a fault affecting one channel, start with its conductor, terminal and field device. If an entire group is affected, include the group supply and shared connections in the investigation. Communication faults require checks of the electronics, network connection and project diagnostics. Replacing the base without separating these possibilities may leave the original fault unresolved.

Inspect used terminal blocks for cracked housings, missing screws, damaged rail latches, corroded contacts and signs of overheating. Recording conductor numbers and supply links before removal helps prevent reconnection errors.

Manuals and PDF documents

Use our Siemens ET 200 user manuals and PDF documents page for wiring diagrams and manufacturer references. Read the TB 16L terminal diagram alongside the documentation for the fitted electronics, particularly where terminal functions differ between input and output applications.

Technical references: Siemens 6ES7193-1CH00-0XA0 data sheet; ET 200L Distributed I/O Device, October 2005, EWA-4NEB 780600902-05; ET 200L/ET 200L-SC system manual, EWA 4NEB 780 6009-02c.

Editor’s note: Read the base’s order number first, then the electronics block’s number. Treating them as one component is an easy way to order the wrong spare. Also check what terminals 17–32 actually do: a higher terminal number does not mean more independent I/O channels.

Related topics

Field devices and control: Inductive sensor range · Siemens S7-300 systems. These links provide application background; they do not establish interchangeability between different product families.

Navigation: Siemens automation · Siemens S7 PLC · SIMATIC S7 · Siemens ET 200 · Terminal blocks · ET 200 manuals