6ES7 157-0AD00-0XA0
6ES7 157-0AD00-0XA0 – Siemens DP/PA Coupler Ex [i]
Series: Siemens SIMATIC DP / DP/PA Coupler
Category: Intrinsically safe PROFIBUS PA field connection
Description and system role
6ES7 157-0AD00-0XA0 is the Ex [i] version of the Siemens DP/PA coupler, connecting PROFIBUS-DP and PROFIBUS-PA. It converts RS-485 transmission to the PA physical layer defined by IEC 61158-2, electrically isolates the two sides and supplies PA field devices. Understanding PROFIBUS DP and PA helps establish its role in the installation.
The coupler connects process instrumentation to the supervisory PLC or process control system. When selecting a replacement, check the full order number, PA current demand, existing coupler/link arrangement and the field devices' Ex documentation.
Transmission rates and PA supply
In stand-alone operation, the DP side runs at 45.45 kbit/s and the PA side at 31.25 kbit/s. The supply is 24 V DC. Siemens' 05/2000 manual explicitly identifies the 0AD00 PA output current as a maximum of 90 mA.
Calculate total device current and cable voltage drop together when planning the PA segment. 90 mA is the total operating-current limit on the PA side. Available network addresses alone do not determine how many devices can be connected. Assess the cabinet power supply and the PA segment as separate electrical budgets.
Connections, addressing and the DP/PA Link
The DP connection uses a 9-pin Sub-D connector; the Ex PA connection uses two screw terminals. This version has a permanently active internal PA terminator, so the coupler is located at an end of the PA cable.
The coupler has no separate PROFIBUS address. The PA field devices are configured using their GSD files. When reviewing an existing project, record field-device addresses, GSD versions and the DP network's transmission-rate setting.
A Link arrangement incorporating an IM157 DP/PA Link interface can operate on the upstream DP network at up to 12 Mbit/s. This capability belongs to the IM157-based system; the stand-alone coupler connection uses 45.45 kbit/s. Check whether the existing cabinet contains an IM157 before selecting parts.
Ex protection and replacement with a later model
The period documentation identifies the 0AD00 protection type as EEx [ia] IIC. The coupler itself must be installed outside the hazardous area. Its intrinsically safe PA circuit and the permitted location of its housing are separate considerations; review the nameplate together with the installation's Ex documentation.
Siemens product information A5E00237840-01 identifies a specific change when moving to 6ES7 157-0AD82-0XA0: Io = 215 mA for the earlier 0AD00, compared with Io = 247 mA for the 0AD82. These are safety parameters used in intrinsic-safety assessment, distinct from the 90 mA PA operating-current limit. Existing field-device certification limits may be unsuitable for the later coupler, so replacement requires an Ex compatibility assessment.
Editor's Note
For a used Ex coupler, a readable model and approval nameplate is an important part of the purchase assessment. Review photographs of the PA terminals, shield connection and supply connector, and ask which PA device and load were used during testing. An operating test provides evidence of condition; Ex suitability for your installation must also be assessed.
PDF documentation and manuals
See Siemens ET 200 PDF documentation and user manuals for relevant documents. PROFIBUS Networks, 05/2000 identifies the earlier 0AD00's current rating and Ex variant; SIMATIC Field Engineering Package, 01/1998 explains connections and system architecture. A5E00237840-01 includes the comparison with the 0AD00 when considering replacement by the 0AD82.
Related topics
For control and monitoring equipment, explore PLC and HMI, operator panels and SCADA. The Siemens S7-300, About Siemens ET 200 and ET 200 PROFIBUS and PROFINET sections can also help when identifying system components.
Other module groups: ET 200 analog input modules · Digital input modules · Digital output modules · Connection modules · Additional modules.
Navigation: Siemens ET 200 · Siemens SIMATIC S7 · Siemens S7 PLC · OtomasyonAVM home