Yaskawa 616 G5 parameter list
AI-00 Language selection for digital operator display (Language Select) 1
AI-01 Fixed access level (Access Level) 2
AI-02 Control method selection (Control Method)
AI-03 (Parameter unspecified)
AI-04 Password 1 (Enter Password) 0000
AI-05 Password 2 (Select Password) 0000
A2-XX User setting constant up to A2-32 (User Param 1 to 32)
b1-01 Reference selection (Reference Source) 1
b1-02 Operation method selection (Operation Source)
b1-03 Stop method selection (Stop Method) 0
b1-04 Reverse operation prohibition (Reverse Operation) 0
b1-05 Operation selection for El-09 or lower setting (Run at Zero Speed) 0
b1-06 Double reading of sequence input (Control Input Scans) 1
b1-07 Operation selection after switching to remote mode (LOCAL/REMOTE RUN Select) 0
b2-01 Zero speed level (DC injection braking start frequency) (DC Injection Start Freq) 0.5
b2-02 DC injection braking current (DC Injection Current) 50
b2-03 DC injection braking time at start (DC Injection Time at Start) 0.0
b2-04 DC injection braking time at stop (DC Injection Time at Stop) 0.10
b3-01 Speed search selection at start (Speed Search at Start) 0
b3-02 Speed search operation current (Speed Search Current) 100
b4-01 Timer function DELAY ON time (Delay ON Timer) 0.0
b4-02 Timer function DELAY OFF time (Delay OFF Timer) 0.0
b5-02 Proportional gain (P) (PID Gain)
b5-03 Integral (I) time (PID I Time) 10
b5-04 Integral limit (PID I Limit) 1000
b5-05 Derivative (D) time (PID D Time) 0.0
b5-06 PID limit (PID Limit) 100.0
b5-07 PID offset adjustment (PID Offset) 0.0
b5-08 (Parameter unspecified)
bT-III Standby frequency at start (Standby Ref at Start) 0.0
bM2 Standby time at start (Standby Time at Start) 0.0
b6-03 Standby frequency at stop (Standby Ref at Stop) 0.0
b6-01 Standby time at stop (Standby Time at Stop) 0.0
b7-01 Droop control gain (Droop Gain) 0.0
b7-02 Droop control delay time (Droop Delay Time) 0.03
b8-01 Energy saving gain (Energy Saving Gain) 80
b8-02 Energy saving frequency (Energy Saving Frequency) 0.0
b9-01 Zero-servo gain (Zero Servo Gain)
b9-02 Zero-servo completion width (Zero Servo Count) 10
C1-01 Acceleration time 1 (Acceleration Time 1) 10.0
C1-02 Deceleration time 1 (Deceleration Time 1) 10.0
C1-03 Acceleration time 2 (Acceleration Time 2) 10.0
C1-04 Deceleration time 2 (Deceleration Time 2) 10.0
C1-05 Acceleration time 3 (Acceleration Time 3) 10.0
C1-06 Deceleration time 3 (Deceleration Time 3) 10.0
C1-07 Acceleration time 4 (Acceleration Time 4) 0.0
C1-08 Deceleration time 4 (Deceleration Time 4) 10.0
C1-09 Emergency stop time (Emergency Stop Time) 10.0
C1-10 Acceleration/deceleration time setting unit (Acc/Dec Units)
C2-01 S-curve characteristic time at acceleration start (S-Curve Acc Start) 0.20
C2-02 S-curve characteristic time at acceleration end (S-Curve Acc End) 0.20
C2-03 S-curve characteristic time at deceleration start (S-Curve Dec Start) 0.20
C2-04 S-curve characteristic time at deceleration end (S-Curve Dec End) 0.20
C3-01 Slip compensation gain (Slip Compensation Gain) 1.0
C3-02 Slip compensation primary delay time (Slip Compensation Time) 2
C3-03 Slip compensation limit (Slip Compensation Limit) 200
C3-04 Slip compensation selection during regeneration (Slip Compensation in Regeneration) 0
C3-05 Flux calculation method (Flux Selection) 0
C4-01 Torque compensation gain (Torque Compensation Gain)