What Is a Type C Thermocouple?

A Type C thermocouple is a specialized high-temperature thermocouple made from a tungsten-5% rhenium (W-5%Re) positive thermoelement and a tungsten-26% rhenium (W-26%Re) negative thermoelement. Unlike common nickel-based thermocouples, Type C belongs to the tungsten-rhenium family and is intended primarily for extremely high-temperature measurements under carefully controlled atmospheric conditions.

In simple terms: Type C is a thermocouple for temperatures far beyond the normal operating region of Type J, K or N sensors. Its greatest advantage is extreme-temperature capability; its greatest limitation is that tungsten-rhenium thermoelements must be protected from oxidizing atmospheres at high temperature.

For this reason, selecting Type C is not simply a matter of asking, “How many degrees can it measure?” Vacuum level, inert gas purity, insulation, protection materials, thermoelement contamination and long-term drift can be just as important as maximum temperature.

What materials are used in a Type C thermocouple?

The nominal Type C thermoelement pair is:

Positive (+): Tungsten-5% Rhenium — W-5%Re
Negative (-): Tungsten-26% Rhenium — W-26%Re

This material system is fundamentally different from Type K thermocouples, Type N and platinum-based Type S thermocouples.

Types K and N are nickel-based base-metal thermocouples. Types R, S and B use platinum-group noble metals. Type C instead uses refractory tungsten-rhenium alloys, which allow operation in temperature regions that would be extremely difficult for ordinary thermocouple materials.

Why is rhenium added to tungsten?

Tungsten has an exceptionally high melting point, but pure tungsten can also be mechanically difficult to work with and may become brittle depending on its condition and application.

Adding rhenium modifies the physical and thermoelectric properties of tungsten. Using two tungsten alloys with different rhenium concentrations creates the difference in thermoelectric behaviour required to generate a useful Seebeck voltage.

The W-5%Re / W-26%Re combination therefore defines not merely two high-temperature wires but a particular standardized temperature–EMF relationship.

What is the Type C temperature range?

Type C reference data extend approximately from 0 °C to 2320 °C.

A critical distinction is required:

The 0–2320 °C reference range is not a guarantee that every physical Type C probe can operate continuously throughout that entire range.

The practical upper limit of a real assembly depends on:

thermoelement diameter
insulation material
protection tube or sheath
vacuum or atmosphere purity
process pressure
exposure time
thermoelement contamination and ageing

This distinction between a standardized reference function and the real operating limit of a sensor is fundamental when interpreting IEC 60584-1 thermocouple reference functions.

Why can Type C measure extremely high temperatures?

Tungsten is a refractory metal with an exceptionally high melting temperature. Tungsten-rhenium thermoelements can therefore remain useful in temperature regions above the practical limits of conventional nickel and platinum thermocouples when the environment is suitable.

W-Re thermocouples have been studied extensively for measurements around and above 2000 °C in specialized laboratory, materials-processing and research systems.

The important qualification is when the environment is suitable. In the presence of oxygen, the high-temperature capability of tungsten becomes severely restricted.

Why should Type C not be exposed to an oxidizing atmosphere?

This is one of the most important application rules for Type C.

Tungsten and tungsten-rhenium alloys can oxidize rapidly at elevated temperatures. Unlike alloys that can develop a useful protective oxide layer under certain conditions, tungsten oxidation can lead to continuing material loss and rapid deterioration of the thermoelements.

Bare Type C thermoelements are therefore not intended for high-temperature oxidizing atmospheres.

A furnace reaching 2000 °C or more does not automatically make Type C the correct sensor. If air or another oxygen-containing gas is present, an appropriate protection strategy must be engineered.

Which atmospheres are suitable for Type C?

Type C thermocouples are primarily associated with:

high vacuum
inert atmospheres
high-purity argon or helium systems
carefully controlled hydrogen applications

Even an “inert” atmosphere should not automatically be assumed safe. At extreme temperature, trace oxygen, moisture, contamination from refractory materials or gases released by insulation can alter thermoelement chemistry.

Hydrogen service also requires attention to material compatibility and possible embrittlement effects in the complete sensor construction.

Why is Type C used in vacuum furnaces?

A properly controlled vacuum greatly reduces exposure of the tungsten-rhenium conductors to oxygen.

This makes Type C attractive for high-temperature vacuum furnaces used for sintering, advanced materials research, refractory-metal processing and specialized heat treatment.

Vacuum does not make the thermocouple permanently stable, however. At extreme temperatures, rhenium redistribution or evaporation, reactions with insulation materials and thermoelectric drift can still occur.

Is Type C useful at low temperatures?

Type C is primarily an extreme-temperature sensor. Even though reference data can be defined down toward room temperature, its main practical advantage begins at much higher temperatures.

For ordinary industrial temperatures of a few hundred degrees Celsius, Type C is usually unnecessarily specialized and expensive.

Depending on the application, Type E, Type T, Type J, K, N or a Pt100 may be far more practical.

How does a Type C thermocouple work?

Type C follows the same fundamental thermoelectric principle as other thermocouples.

The W-5%Re and W-26%Re thermoelements have different Seebeck coefficients. When the circuit is exposed to a temperature distribution, a measurable thermoelectric EMF develops.

The output remains at millivolt level and is nonlinear with temperature. A Type C thermocouple therefore cannot be converted accurately with one universal mV/°C value.

Type C temperature–EMF reference function

The forward relationship can be expressed conceptually as:

E = f(t90)

A measuring instrument performs the inverse calculation:

t90 = g(E)

IEC 60584-1 defines reference functions on the ITS-90 temperature scale with a 0 °C reference junction. The relationship between reference tables, forward polynomials and inverse functions is discussed in Thermocouple Reference Tables, Polynomials and ITS-90.

Type C versus Type A

Type C and Type A both belong to the tungsten-rhenium thermocouple family, but their negative thermoelements contain different amounts of rhenium.

Type C: W-5%Re / W-26%Re
Type A: W-5%Re / W-20%Re

This difference produces different temperature–EMF characteristics. Type A and Type C must therefore not be treated as the same sensor by a transmitter, controller or software linearization.

Type C versus Type B

Type B is a Pt-30%Rh / Pt-6%Rh noble-metal thermocouple designed for high-temperature measurement.

Type B is based on platinum-rhodium alloys. Type C is based on tungsten-rhenium.

Type B can be suitable in appropriate oxidizing or inert high-temperature environments, while bare Type C thermoelements require protection from oxygen.

Type C can reach substantially higher temperature regions, but this advantage comes with much stricter atmospheric requirements.

Type C versus Type R and Type S

Type R and Type S use platinum/platinum-rhodium thermoelements and have very different chemical behaviour from tungsten-rhenium Type C.

Type C can operate at significantly higher temperatures in the correct environment, but its oxidation sensitivity is far more restrictive.

For this reason, the thermocouple with the highest temperature number is not automatically the best thermocouple for a process.

Type C versus Type K and Type N

Type K and Type N are nickel-based base-metal thermocouples.

Their usable high-temperature region is much lower than that of Type C, but they are considerably more practical for normal industrial furnaces, machinery, process equipment and standard control systems.

Type C becomes relevant when extreme temperature and a controlled atmosphere exist at the same time.

When should non-contact temperature measurement be considered?

At extreme temperatures, the physical temperature sensor itself becomes part of the materials-engineering problem.

For this reason, some applications use non-contact temperature sensors, infrared pyrometers or optical temperature measurement either alongside or instead of a tungsten-rhenium thermocouple.

Non-contact measurement is not automatically more accurate. Emissivity, optical access, field of view, window transmission and surface condition create a different set of uncertainty sources.

What insulation is used with Type C thermocouples?

Conventional low-temperature cable insulation cannot survive the extreme hot zone in a Type C application.

Special high-temperature assemblies may use refractory ceramic insulation systems based on materials such as alumina, beryllia, hafnia or other ceramics selected for the particular environment.

Insulation selection is not simply an electrical issue. At extreme temperature, chemical reactions, diffusion and contamination between the insulation and tungsten-rhenium conductors can alter thermoelectric behaviour.

For this reason, a Type C assembly can require considerably more specialized materials engineering than an ordinary industrial mineral-insulated probe.

Can Type C be installed inside a protective sheath?

Yes, specialized sheathed constructions are possible. The sheath itself, however, must survive the temperature and remain chemically compatible with the thermoelements and process atmosphere.

Ordinary stainless-steel thermocouple sheaths are not suitable for the extreme upper temperature region of Type C.

Refractory-metal sheaths and specialized ceramic protection systems may be required.

The complete design should therefore be evaluated as a system consisting of thermoelements + insulation + sheath/protection tube + sealing + process atmosphere.

Can a Type C thermocouple drift?

Yes. Extreme temperature capability does not mean unlimited thermoelectric stability.

Possible high-temperature changes include:

rhenium redistribution or preferential loss
changes in alloy composition
evaporation and material transport
reaction with insulation materials
thermoelectric inhomogeneity
high-temperature ageing

These changes can alter the EMF produced at a given temperature even though the thermocouple remains electrically continuous.

Why is Type C calibration difficult?

Creating a reliable reference environment above 2000 °C is already a demanding metrology problem.

The thermocouple can also continue to age while it is being exposed to the high temperatures required for calibration.

Consequently, calibration of tungsten-rhenium thermocouples requires specialized high-temperature facilities, suitable reference systems and careful interpretation of drift.

Does Type C require cold-junction compensation?

Yes. Measuring 2000 °C does not remove the thermocouple's dependence on reference-junction temperature.

The Type C reference function assumes a reference junction at 0 °C, so a practical system still requires cold-junction compensation (CJC).

The fact that the hot junction may be above 2000 °C does not make a reference-junction error at room temperature irrelevant.

Can Type C use extension wiring?

The thermoelectric properties of the complete connection between sensor and instrument must be considered carefully.

Running tungsten-rhenium conductors all the way to the control cabinet may be impractical or expensive, but any alternative extension arrangement must be specifically suitable for the Type C measuring system.

The general principles behind thermocouple extension and compensation are explained in thermocouple extension and compensating cables.

Can Type C be connected directly to a PLC?

Only if the PLC or input module genuinely supports Type C.

Not every PLC thermocouple module includes tungsten-rhenium Type C linearization. Support for J, K, T, E, N, R, S and B is much more common.

If Type C is not supported directly, a dedicated millivolt measurement system or a compatible temperature transmitter may be required.

Connecting Type C to a Type K input and accepting an “approximate” reading is not a valid measurement method.

Can Type C be converted to 4–20 mA?

Yes, if the transmitter supports the correct Type C reference function.

A suitable transmitter measures the W-5%Re/W-26%Re EMF, applies reference-junction compensation and converts the calculated temperature into a standard process signal such as 4–20 mA.

The PLC can then receive the temperature through a standard analog input instead of performing specialized tungsten-rhenium linearization itself.

Can Type C be connected to a temperature controller?

A temperature controller should accept Type C directly only when its input specification explicitly lists Type C or W-5%Re/W-26%Re.

Type C is much less common in standard industrial controllers than J or K, so the supported thermocouple list should always be checked rather than assumed.

Does electrical noise matter with Type C?

Yes. Even though Type C measures extremely high temperatures, its electrical output is still only at millivolt level.

Electromagnetic interference from variable frequency drives (VFDs), servo drives, heaters switched by power electronics and motor cables can still disturb the measurement.

Low-level thermocouple wiring should therefore be routed appropriately away from high-power switching conductors.

What does Type C tolerance mean?

A real tungsten-rhenium thermocouple may produce an EMF that differs from the ideal standardized reference function.

For extreme-temperature Type C measurements, however, initial tolerance is only one part of the problem.

At very high temperatures, drift, material loss, chemical interaction and thermoelectric inhomogeneity can become equally important or more important than the initial manufacturing tolerance.

Critical systems should therefore consider the complete thermocouple measurement uncertainty rather than quoting one tolerance value alone.

What contributes to Type C measurement uncertainty?

Important contributors can include:

thermoelement calibration
high-temperature drift
rhenium loss or redistribution
thermoelectric inhomogeneity
reactions with insulation or sheath materials
cold-junction compensation
measurement electronics
connection wiring
furnace temperature gradients
sensor location and immersion

At temperatures around 2000 °C, describing the entire measurement chain with a single “sensor accuracy” number can therefore be seriously misleading.

Where are Type C thermocouples used?

With the correct atmosphere and mechanical construction, Type C can be used in:

vacuum furnaces
high-temperature sintering systems
refractory-metal research
nuclear research equipment
extreme-temperature material testing
inert-atmosphere laboratory furnaces
aerospace and turbine research
specialized measurements above 2000 °C

What should be specified when selecting a Type C thermocouple?

A useful Type C specification should include at least:

Normal and maximum operating temperature
Vacuum level or process gas
Expected oxygen or moisture content
Thermoelement diameter
Insulation material
Protective sheath or tube material
Probe length
Actual Type C support in the measuring instrument
Calibration requirement
Expected service duration

If oxygen is present in the hot zone, selecting the sensor simply because “Type C reaches 2300 °C” can result in a badly designed measurement system.

Advantages of Type C thermocouples

In the correct application, Type C can provide:

extreme-temperature measurement capability
use in specialized processes above 2000 °C
suitability for vacuum and inert-atmosphere applications
a long history in high-temperature materials research
a standardized temperature–EMF reference function

Limitations of Type C thermocouples

Important limitations include:

poor suitability for oxidizing atmospheres
less common availability than ordinary J, K or N sensors
need for specialized insulation and protection materials
thermoelectric drift at extreme temperatures
possible rhenium loss and material transport
limited direct support in standard PLCs and controllers
little practical advantage for ordinary low- and moderate-temperature measurements

Conclusion

Type C is a W-5%Re / W-26%Re tungsten-rhenium thermocouple designed for specialized extreme-temperature measurement.

Its reference data extend to approximately 2320 °C, but that number should never be interpreted as a universal continuous-service rating for every physical Type C probe.

Its greatest strength is extreme-temperature capability. Its greatest weakness is poor resistance to high-temperature oxidation.

A reliable Type C system therefore requires far more than two tungsten-rhenium wires. Atmosphere control, insulation, protection materials, cold-junction compensation, correct Type C linearization, wiring and high-temperature drift must all be considered together.

Related thermocouple types and high-temperature measurement topics

+ Types of Thermocouples (T/C)

+ What Is a Type A Thermocouple? · What Is a Type B Thermocouple?

+ What Is a Type R Thermocouple? · What Is a Type S Thermocouple?

+ What Is a Type N Thermocouple? · Type K Thermocouples

+ What Is a Thermocouple? · Seebeck Effect

+ Cold-Junction Compensation ·